Nope, not used at all in fact. After 2nd lockup, I busied out all the lines to that card, still locked up on me. Yet, in the office, it's just fine. SMT -----Original Message----- From: Jeff Mcadams [mailto:jeffm@iglou.com] Sent: Wednesday, December 15, 1999 1:48 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) DSP locks up in one chassis, never in our test chassis Thus spake Scott Trautman

Ever seen that? Locks up within about an hour. Pulled it out of the production chassis it was in (3 DSP's, Quad's and Dual T1, only 1 T1 on it), put in our test chassis, no lockups half day. Other two DSP's work just fine no problems. Any ideas of where to start on this before I send it back to 3Com?

HiperARC's, NMC's all with latest and greatest, slots otherwise fine with quad card before this changeover today, so don't think I have a "problem slot".

Any questions to ask would even be helpful.

How many calls does it get in the test chassis? Does it get fully loaded up there? -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.