(usr-tc) Dialout with Quad Digital Modem cards
Hey All, I need some help in dialing out of a Quad Digital Modem card using the analog NIC's serial port. When I try this, the modem dials and the remote modem answers the call and starts handshake. After the completion of the handshake, the connection is then dropped within seconds. I tested this to several different server modems as well as a USR sportster. The Quad card software version is 5.10.9 and the Analog NIC is 1.1.0. I have tried this with several different Quad cards with the same results. If I Telnet to the Quad card and dial it connects and works fine. Any help would be appreciated. Lou Bernstein - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I have a TOTAL CONTROL with 24 modems on the slots "QUAD V.34 ANGL/DIG MODEM" US ROBOTICS. I get more than 200 customers. The problem is that I get some customers wich can't connect to this components. When the connection is established, 35 seconds later, th e customer is disconnected. I look at the log file and I realise that the cause of disconnection is ERROR 31. I look to documentation. Has anybody already had that problem. I am waiting for your response. Elisee - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Elisee NGAN TAMBA -
Lou Bernstein