Hello All I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing : Booting*...* Loading Kernel....OK Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol. My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default? Or any other suggation... really in a bad position. please help. Thanks in advance; Ahamed Bauani. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Hi, Are you sure that your console cable is okay, or the port you are using to connect and of course the rate of connection. Sometimes it creates problem, though it's giving output partly. if you have extra TC, you can make it sure with the same cable and port. I guess you have the HiPer ARC User Manual (PIN 1.024.1343-00) and you are following it (Specially Chapter 2, Chapter 9). Unless you are getting the HiPer ARC Access Router Boot Configuration menu, you have some other problem to communicate with TC. By the way, you can drop the dopic at BDLUG too. There are other TC users. Take care. Zahid Hossain On Friday 08 Aug 2003 8:43 pm, Ahamed Bauani wrote:
Hello All
I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing :
Booting*...*
Loading Kernel....OK
Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol.
My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default?
Or any other suggation... really in a bad position. please help.
Thanks in advance;
Ahamed Bauani.
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
I think console cable is okay, because, by this cable I can connect to NMC nicely. And just 1 days ago i could connect to Hiper ARC with this cable;!. Thanks for your suggation, I am now going to test it out, oh, other thing, I don't want to let bdlug member (Specaly someone of there) that I am working for a TC of others then my company;)) You know why:( Bauani. --- zahid@cxbd.com wrote:
Hi, Are you sure that your console cable is okay, or the port you are using to connect and of course the rate of connection. Sometimes it creates problem, though it's giving output partly. if you have extra TC, you can make it sure with the same cable and port.
I guess you have the HiPer ARC User Manual (PIN 1.024.1343-00) and you are following it (Specially Chapter 2, Chapter 9). Unless you are getting the HiPer ARC Access Router Boot Configuration menu, you have some other problem to communicate with TC.
By the way, you can drop the dopic at BDLUG too. There are other TC users.
Take care.
Zahid Hossain
On Friday 08 Aug 2003 8:43 pm, Ahamed Bauani wrote:
Hello All
I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing :
Booting*...*
Loading Kernel....OK
Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol.
My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default?
Or any other suggation... really in a bad position. please help.
Thanks in advance;
Ahamed Bauani.
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Turn on dip switch 5 and try console again. Ahamed Bauani wrote:
Hello All
I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing :
Booting*...*
Loading Kernel....OK
Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol.
My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default?
Or any other suggation... really in a bad position. please help.
Thanks in advance;
Ahamed Bauani.
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Hello, all. Well, there hasn't been a message posted here for nearly three months, so I'm not sure the list is even alive anymore :) Hope this finds you and your gear in working order! Anyway, I was recently contacted by Source-T about renewing my software support contract, and it occurred to me that there has been *nothing* new released since February of 2003, and not a word of future releases here on this list (or anywhere else that I could find). So, my immediate reaction to the question about renewing is "why?" If nothing appears to be happening, why renew? So, my question to those who are more tuned-in (or a lot of days - clued-in) than I is - has there been, will there be, or is there any reason otherwise to expect future software releases out of UTStar (or whomever Commworks has become now) that would give me any reason at all to renew my contract? Any new features in the works, any serious bugs I haven't read about, anything new on the horizon at all? I'm currently running TCS 4.7 and CEM, had virtually no issues with it thus far (other than a flaky DSP card at one point), and with the value of used USR/3Com TC chassis and hardware being less than a rusted out '79 Ford Pinto, I certainly don't need hardware support/warranty - I've got spares for everything and then some. I like my TC gear, I just don't currently see much value in renewing a support contract. Thoughts? Brad Gass Minnesota Network Services 117 North 3rd Street Marshall, MN 56258 507-532-5932 Office Phone 507-532-6002 Fax 507-829-3490 Cellular bradg@mnns.com Email (off-list)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 10 November 2003 12:07 pm, Brad Gass wrote:
I like my TC gear, I just don't currently see much value in renewing a support contract.
Thoughts? Me thinks you are right. We are running 3.5.109 on DSP without issue. The release notes seems to imply that unresolved issues will probably stay that way. Our contract just came up and 3 providers tried to get me renewed. Even a software only contract at this point is a waste unless they provide some fix/enhancement.
I think I have two complete spare chassis at this point. - -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE/sOz8pT00mQjG01gRAhq2AJ4ysni5MxDunMmT+jNh0zEXSGb9tACcCdi+ kS5pjCmxI9rhJ014HmLu/qg= =EEXs -----END PGP SIGNATURE-----
participants (5)
-
Ahamed Bauani -
alex -
Brad Gass -
Lewis Bergman -
Zahid Hossain