Hello, In order to try improve user x2 connect speeds, I tried to raise the x2 transmit level on quad modem cards. The problem is I have two quad modem models (analog/digital vs. digital only) and the first don't let me go higher than -12dB, while the other ones happily accepted -10dB (this is as far as I may go from the telco point of view) Now the only difference between modems is the analog capability (referring to the possibility of getting signal from nic or pritdm) and the country code. All modems are setup as digital, taking signal via pritdm from e1 card. Is there anything I can do about this one? Dan -- Dan Borlovan <danb@dnttm.ro> System Administrator, Network Operation Center Dynamic Network Technologies - Timisoara, Romania Telefon: +40-56-204967 FAX: +40-56-220201 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.