Is there any facility to Restrict telnet access on HiperARC only from few hosts?? Like router have ACLs.... , I know filters are there but dont know how to use it for telnet restriction on HiperARC. Thanks pankaj
add telnet client ? Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of pankaj Sent: Tuesday, July 16, 2002 9:35 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] telnet block on HiperARC Is there any facility to Restrict telnet access on HiperARC only from few hosts?? Like router have ACLs.... , I know filters are there but dont know how to use it for telnet restriction on HiperARC. Thanks pankaj _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Hi, On Tue, Jul 16, 2002 at 07:05:29PM +0530, pankaj wrote:
Is there any facility to Restrict telnet access on HiperARC only from few hosts?? Like router have ACLs.... , I know filters are there but dont know how to use it for telnet restriction on HiperARC.
Just try something like: add telnet client <Station_Address/Mask_Specifier> and then: enable telnet client_access Should do the trick. Regards, Oliver.
Thanks pankaj
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- Was hat bei uns die geringste PopulariTAET? Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking now.
Just a quick note make SURE you have added the correct telnet clients before you type enable telnet client_access if you get them wrong, you will lock yourself out of the HiperARC. I have done this myself, so I want to prevent anyone else from that fun situation. Good luck! -= Mark Shumate -= InfoWest -= marks@infowest.com
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Oliver Francke Sent: Tuesday, July 16, 2002 7:54 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] telnet block on HiperARC
Hi,
On Tue, Jul 16, 2002 at 07:05:29PM +0530, pankaj wrote:
Is there any facility to Restrict telnet access on HiperARC only from few hosts?? Like router have ACLs.... , I know filters are there but dont know how to use it for telnet restriction on HiperARC.
Just try something like:
add telnet client <Station_Address/Mask_Specifier>
and then:
enable telnet client_access
Should do the trick.
Regards, Oliver.
Thanks pankaj
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- Was hat bei uns die geringste PopulariTAET?
Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking now.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Thanks guys Its done. Any good links or userguide, for such a configurations and command reference for 3Com total control1000, HiperDSP, ARC , NMC ??? Thanks pankaj ----- Original Message ----- From: "Oliver Francke" <Oliver.Francke@mediaWays.net> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, July 16, 2002 7:24 PM Subject: Re: [USR-TC] telnet block on HiperARC
Hi,
On Tue, Jul 16, 2002 at 07:05:29PM +0530, pankaj wrote:
Is there any facility to Restrict telnet access on HiperARC only from few hosts?? Like router have ACLs.... , I know filters are there but dont know how to use it for telnet restriction on HiperARC.
Just try something like:
add telnet client <Station_Address/Mask_Specifier>
and then:
enable telnet client_access
Should do the trick.
Regards, Oliver.
Thanks pankaj
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- Was hat bei uns die geringste PopulariTAET?
Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking now.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Thus spake pankaj (pankaj@worldgatein.net):
Any good links or userguide, for such a configurations and command reference for 3Com total control1000, HiperDSP, ARC , NMC ???
participants (5)
-
Mark Ivens -
Mark Shumate -
Oliver Francke -
pankaj -
Todd Bertolozzi