Greetings, I have a wierd problem that I am unable to resolve, it goes a little something like this. I have a Total Control Chassis, It all appears to be configured correctly but when I dial into it, the line goes quies for about 10 seconds then a busy signal. I have followed the enable Debug routein but even then the Call control call stats show no dialins even after several attempts this got me thinking that it was a telco problem that was until I enabled Display Call Control Debug Info and then whenever I dialed in I got this on the console; :uccu_get_new_uccb: attach uccb to head of list. tcid: 0x1e ucid: 0x0000001e uccu_get_new_uccb: ALLOC tcid: 0x1e ucid: 0x0000001e, allocated = 1, dsl_id=1 sfn:ucc_null,evt:20-SETUP_IND,tcid:0x1e,ucid:0x0000001e ucc_setup_in_call: tcid: 0x1e, CRV: 38 (0x26) DNIS nums:2 cl type override nums:0 ucc_setup_in_call: ANI (calling_phnum) ><, len = 0, err = 0x31 ucc_setup_in_call: Info buffer allocated GetDS0SlotMapByte: mdm_id=0 span=1 ds0=32 octet=3 bitmap=80 GetDS0SlotMapByte: mdm_id=0 span=1 ds0=32 octet=2 bitmap=0 GetDS0SlotMapByte: mdm_id=0 span=1 ds0=32 octet=1 bitmap=0 GetDS0SlotMapByte: mdm_id=0 span=1 ds0=32 octet=0 bitmap=0 uccu_get_tncid_uccb: tcid = 0x1e, position in uccb list = 0, dsl = 1 sfn:ucc_s8_go_null,evt:15-CLEAR_IND,tcid:0x1e,ucid:0x0000001e uccu_releasing uccb: DE-ALLOC: tcid = 0x0, ucid = 0x0000001e uccu_release_uccb: Info buffer released uccidm_release_ds0: span = 1, ds0 = 32 uccu_release_bchs: DE-ALLOC ucid: 0x0000001e The first 1/2 happens when I dial then after the space is when it sends me the busy signal? Any Ideas? Thanks, Aaron - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.