Alex: I have decided to setup a RADIUS server. Do you know which port is used by the RADIUS server? Thanks. Kirt -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Saturday, October 04, 2003 8:00 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Authentication There has to be open radius port on linux machine. TC is using radius for authentication. You have to run radius (or maybe tacacs). Kirti S. Bajwa wrote:
Scott:
I am not using RADIUS server. I think your suggestion is close. I currently have a system where the dial-in bank (similar to 3COM TC), which uses pap authentication & it works.
Do you have another suggestion?
Thanks.
Kirt
-----Original Message----- From: Scott Trautman [mailto:scott@gdinet.com] Sent: Friday, October 03, 2003 2:09 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modem systems.' Subject: RE: [USR-TC] Authentication
You have your ARC's primary_secret set & matching your radius server's secret (clients file?)
Scott M. Trautman 608-240-4638 Global Dialog Internet www.gdinet.com smt@gdinet.com 2049 Skaalen Rd., Stoughton WI 53589
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- alex, ICQ# 219089461, Current status
UDP: 1645 (default in tc) or 1812 - radius (authentication) 1646 (default in tc) or 1813 - radacct (accounting) Kirti S. Bajwa wrote:
Alex:
I have decided to setup a RADIUS server. Do you know which port is used by the RADIUS server?
Thanks.
Kirt
-----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Saturday, October 04, 2003 8:00 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Authentication
There has to be open radius port on linux machine. TC is using radius for authentication. You have to run radius (or maybe tacacs).
Kirti S. Bajwa wrote:
Scott:
I am not using RADIUS server. I think your suggestion is close. I currently have a system where the dial-in bank (similar to 3COM TC), which uses pap authentication & it works.
Do you have another suggestion?
Thanks.
Kirt
-----Original Message----- From: Scott Trautman [mailto:scott@gdinet.com] Sent: Friday, October 03, 2003 2:09 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modem systems.' Subject: RE: [USR-TC] Authentication
You have your ARC's primary_secret set & matching your radius server's secret (clients file?)
Scott M. Trautman 608-240-4638 Global Dialog Internet www.gdinet.com smt@gdinet.com 2049 Skaalen Rd., Stoughton WI 53589
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- alex, ICQ# 219089461, Current status
List, I am looking to get a E1 DSP R2 Card to work in PRI mode. Please if anyone could help me to get the code for making this change please let me know. Already got the telco E1 installed but need to change the setting on the DSP card to make it work. Alexander ----- Original Message ----- From: alex To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Sent: Saturday, October 04, 2003 7:13 AM Subject: Re: [USR-TC] Authentication UDP: 1645 (default in tc) or 1812 - radius (authentication) 1646 (default in tc) or 1813 - radacct (accounting) Kirti S. Bajwa wrote: Alex: I have decided to setup a RADIUS server. Do you know which port is used by the RADIUS server? Thanks. Kirt -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Saturday, October 04, 2003 8:00 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Authentication There has to be open radius port on linux machine. TC is using radius for authentication. You have to run radius (or maybe tacacs). Kirti S. Bajwa wrote: Scott: I am not using RADIUS server. I think your suggestion is close. I currently have a system where the dial-in bank (similar to 3COM TC), which uses pap authentication & it works. Do you have another suggestion? Thanks. Kirt -----Original Message----- From: Scott Trautman [mailto:scott@gdinet.com] Sent: Friday, October 03, 2003 2:09 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modem systems.' Subject: RE: [USR-TC] Authentication You have your ARC's primary_secret set & matching your radius server's secret (clients file?) Scott M. Trautman 608-240-4638 Global Dialog Internet www.gdinet.com smt@gdinet.com 2049 Skaalen Rd., Stoughton WI 53589 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -- alex, ICQ# 219089461, Current status ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
alex -
Alexander Bernal -
Kirti S. Bajwa