Like such: public@192.168.1.1:eth:1 ?? -----Original Message----- From: usr-tc-bounces+johnbin=ll.net@mailman.xmission.com [mailto:usr-tc-bounces+johnbin=ll.net@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, June 06, 2006 2:38 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Ethernet Traffic John, I don't know about a specific oid, but if you are using MRTG you can just point it to the ARC IP, supply a community string, specify either "eth:1 or eth:2" for the interface name and it should graph IP traffic for the specified port. -- Adam Barnhill 573-686-9114 -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of John Biniecki Sent: Tuesday, June 06, 2006 1:56 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Ethernet Traffic Does anyone know what the oid is for ethernet traffic on the ARC? I am trying to plot total traffic in mrtg. Thank you John P. Biniecki Director of Information Systems Tiger Communications, Inc. 116 W. Illinois St., Suite 6E Chicago, IL 60610 (312) 399-8903 johnbin@LL.net _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc