On Mon, 11 Jun 2001, Mike Greene wrote:

Well the results are in! The proper memory chip is shown below...

128MB EDO 168pin BUFFERED 3.3v

Popped that bugger in and inserted the card and presto, 128MB on the card, the ROM memory is NOT replaceable but I don't see that as being a major issue.

As a reseller I paid $143.00 per chip, your mileage may vary...

- Mike

------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------

Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: <RickL@solunet.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, October 16, 2001 1:14 PM Subject: (usr-tc) What memory does the HiperARC use?

Hi, Does anyone know the specs on HiperARC memory? I know it is EDO, but: Parity or Non-Parity ? Gold Lead or Tin Lead ? 5 volt ?

Thanks, Rick

Rick Louizos Solunet Soluserve TAC Palm Bay, Fl. 32905 Phone Numbers: Phone: (888)449-5766 / Fax: (407)676-0809 Internet Addresses: mailto:RickL@solunet.com / http://www.solunet.com

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.