Is anyone else having problems with IMACs disconnecting frequently? We have a couple customers that are having problems with getting dropped soon after they connect (sometimes less than a minute, other times 10-15 minutes later). Other times, they can stay on for hours. Is there some setting on a Mac that can improve this? Thanks, Wayne Barber Coastal Telco Services - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
We sometimes have this problem. If you can get them to select the "imac 56k (v.34 only)" modem in the modems control panel, it will stabilize the connection. The other option might be to make a custom modem init script to limit the connect speed to their initial connection speed or a notch lower (which seems to work well with the rockwell HCF modems too). Here is readme about the v.34 script http://til.info.apple.com/techinfo.nsf/artnum/n22234?OpenDocument&software Here is an article on how to create a modem script which I haven't used yet. http://til.info.apple.com/techinfo.nsf/artnum/n24654?OpenDocument&software Randy McMillan PacInfo ----- Original Message ----- From: "Wayne Barber" <barberw@tidewater.net> To: <usr-tc@xmission.com> Sent: Thursday, April 27, 2000 8:08 AM Subject: (usr-tc) IMAC disconnects
Is anyone else having problems with IMACs disconnecting frequently? We have a couple customers that are having problems with getting dropped soon after they connect (sometimes less than a minute, other times 10-15 minutes later). Other times, they can stay on for hours. Is there some setting on a Mac that can improve this? Thanks,
Wayne Barber Coastal Telco Services
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, Does TC (HARC and Netserver) support "Reverse Path Forwarding"? Thank you, - Marcelo - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
On Fri, 28 Apr 2000, Marcelo Souza wrote: | Does TC (HARC and Netserver) support "Reverse Path Forwarding"? Should I give some more detail about that? Nobody out there uses this packet routing? It was told to me that it is common on Cisco, and I would like to know if it's possible to implement on our chassis. Thank you, - Marcelo - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Marcelo Souza -
Randy McMillan -
Wayne Barber