Do you have to buy one of the new HDM's to get the 96 channel capibility, or can you simply swap out the NIC portion of the HDM? In other words, is their an upgrade path? Anyone using the 96 channel HDM's or DS3 modules? Brian ----------------------------------------------- Brian Feeny, CCNP+ATM, CCDP signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Also sprach Brian
Do you have to buy one of the new HDM's to get the 96 channel capibility, or can you simply swap out the NIC portion of the HDM? In other words, is their an upgrade path?
You'll need to buy the new NAC. The current DSP's only have 24 (30 for E1 versions) modems on the card, so you can't handle 96 calls on the current NACs. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
On Tue, 12 Dec 2000, Jeff Mcadams wrote:
Also sprach Brian
Do you have to buy one of the new HDM's to get the 96 channel capibility, or can you simply swap out the NIC portion of the HDM? In other words, is their an upgrade path?
You'll need to buy the new NAC. The current DSP's only have 24 (30 for E1 versions) modems on the card, so you can't handle 96 calls on the current NACs.
Actually, the current NAC's have 6 DSP's, each emulates 4 modems. I heard that these same cards were able to actually do 8 modems per DSP about 2 years ago, and thought maybe they pushed it even further. The plan worked out nicely when 3Com envisioned it: 14 slots, 1 hdm per slot, 23/24 channels per slot, 1 pri/t1 per slot but once they were able to double to 8 modems per DSP: 14 slots, 1 hdm per slot, 46/24 channels per slot, 1 DS3 for the chassis that was the rationale behind using a utilization meter on the front of the HDM NAC vs. a 1:1 LED per modem mapping, since this way they could expand the NAC DSP-wise........... The sad part is they probably have the software but won't release (the software existed 2 years ago or so..........inside sources tell me) (that is the software to double the modem emulation of the DSP's) brian
-- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------- Brian Feeny, CCNP+ATM, CCDP signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Also sprach Brian
On Tue, 12 Dec 2000, Jeff Mcadams wrote:
You'll need to buy the new NAC. The current DSP's only have 24 (30 for E1 versions) modems on the card, so you can't handle 96 calls on the current NACs.
Actually, the current NAC's have 6 DSP's, each emulates 4 modems. I heard that these same cards were able to actually do 8 modems per DSP about 2 years ago, and thought maybe they pushed it even further.
OK...the original DSPs cards had a dsp chip for every two modems...the newer DSP cards have a dsp chip for every four modems (same code base). They (according to what I've heard) are basically the same type of dsp chips...but the newer ones are a newer version...thus the capability of handling more modems. I was not under the impression that it was just a software change (though that certainly is possible).
that was the rationale behind using a utilization meter on the front of the HDM NAC vs. a 1:1 LED per modem mapping, since this way they could expand the NAC DSP-wise...........
They also just plain didn't have enough room for 24 leds for modems along with carrier, alarm, loopback, fail, and power leds. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
These are actually shipping now? Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.) On Tue, 12 Dec 2000, Brian wrote:
Do you have to buy one of the new HDM's to get the 96 channel capibility, or can you simply swap out the NIC portion of the HDM? In other words, is their an upgrade path?
Anyone using the 96 channel HDM's or DS3 modules?
Brian
----------------------------------------------- Brian Feeny, CCNP+ATM, CCDP signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I don't know. I got a spam fax from someone saying "Be the first to own the new 96port HDM, blah blah". Then the 3Com site talks about all this new gear. I am confused. I don't even know what a Total Control 2000 is or whats the differnce, I need to spend some time on their site getting back up to speed. Brian On Tue, 12 Dec 2000, Mike Andrews wrote:
These are actually shipping now?
Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties
www.fark.com: If it's not news, it's Fark. (Or something like that.)
On Tue, 12 Dec 2000, Brian wrote:
Do you have to buy one of the new HDM's to get the 96 channel capibility, or can you simply swap out the NIC portion of the HDM? In other words, is their an upgrade path?
Anyone using the 96 channel HDM's or DS3 modules?
Brian
----------------------------------------------- Brian Feeny, CCNP+ATM, CCDP signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------- Brian Feeny, CCNP+ATM, CCDP signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Brian -
Jeff Mcadams -
Mike Andrews