Hello! Look in your \mrtg\contrib directory. There should be a "tch" folder. If not grab the latest version of MRTG. There are some pl files, an mrtg.cfg file and a readme file in there that can help you get it working. Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg@no-spam.coastlink.com (remove no-spam. to email me) http://www.coastlink.com -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jolliffe, Anu Sent: Friday, January 07, 2000 2:27 AM To: 'usr-tc@lists.xmission.com' Subject: (usr-tc) mrtg tc help needed I already have mrtg working on our routers, but I am in desperate need of help getting mrtg to graph our total control modem usage I would like to setup mrtg to create pages similar to the ones found at http://statistics.1st.net/3com/. I currently have three chassis, one running hiper dsp's and an arc, with the other two are running quad's and nsc's. So far I have searched the archives at http://usr-tc.1st.net/ and been to the following sites in order to figure this out. http://www.dcr.net/~mandrews/usrtoys/index.shtml and http://www.netdoor.com/arcwho/ I have also accumulated, hiperarc.pl, hiperarc_count.pl and hiperdsp.pl, but I am still at a complete loss and basically need step by step instructions. Any help appreciated, thanks. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.