yes. that was it. shannan called me like 90 seconds after he saw my post and helped me fix it. thanks for the help joel and shannan. you guys always come through when i need help with total control stuff. matthew At 01:24 PM 3/20/2003 -0600, you wrote:

make sure there are no conflicts between lan and wan and wan2.

If wan2 address is 0.0.0.0, then put something in for it and a subnet mask to go with it.

-----Original Message----- From: matthew [mailto:matthew@the-spa.com] Sent: Thursday, March 20, 2003 1:07 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] problem setting up new chassis - hiper nmc error...

ok so i'm trying to setup a new chassis.

all i did so far was to try and set the ip address and gateway for the lan.

when i try to save the settings it gives me the following error...

error: networks should be on different interface subnets

i must be missing something really stupid.

matthew

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

matthew de Jongh president the spa! internet voice (413) 539-9818 www.the-spa.com