RE: [USR-TC] HiPer ARC & TCM!!!!
Wayne: Please also answer configuration of HiPer DSP. I have configured it only using TCM (no CLI). Does it work or HiPer DSP should be configured from CLI? Thanks. Kirt -----Original Message----- From: Wayne Barber [mailto:barberw@tidewater.net] Sent: Monday, September 22, 2003 11:39 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] HiPer ARC & TCM!!!! TCM was never meant to configure or control the ARC. It's only use with the ARC is to display hardware and software versions. The results you are seeing are normal. HARM, IMHO, was never a reliable product. You are better off using CLI to program the ARC. On 20 Sep 2003 at 17:36, Kirti S. Bajwa wrote:
Hello List:
I finally figured out how to configure HiPer ARC using CLI & HARM. However, when I display ARC in TCM, none of the settings are showing! Can someone explain why?
Thanks.
Kirt Bajwa TIB Computer Systems Mountain City, TN 37683 Tel: (423) 727-3001 eMail: kbajwa@tib.com <mailto:kbajwa@tib.com>
Wayne Barber Coastal Telco Services _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 22 September 2003 03:44 pm, Kirti S. Bajwa wrote:
Wayne:
Please also answer configuration of HiPer DSP. I have configured it only using TCM (no CLI). Does it work or HiPer DSP should be configured from CLI? I use the TCM to config all my hiperDSP's. It is easier to copy one config to multiple cards in the TCM.
Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE/cFrgpT00mQjG01gRAk0uAJ9stABMHvvHIHQfz5jH4067PWI1CQCfYzmJ qKJ4D4P+ppgAGmL3d8A8D9o= =6Xoc -----END PGP SIGNATURE-----
Do you know where one can obtain the TCM software. I had it a few years ago and no longer have it on any machines running. Thanks, Mike ----- Original Message ----- From: "Lewis Bergman" <lbergman@wtxs.net> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, September 23, 2003 9:38 AM Subject: Re: [USR-TC] HiPer ARC & TCM!!!!
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On Monday 22 September 2003 03:44 pm, Kirti S. Bajwa wrote:
Wayne:
Please also answer configuration of HiPer DSP. I have configured it only using TCM (no CLI). Does it work or HiPer DSP should be configured from CLI? I use the TCM to config all my hiperDSP's. It is easier to copy one config to multiple cards in the TCM.
Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQE/cFrgpT00mQjG01gRAk0uAJ9stABMHvvHIHQfz5jH4067PWI1CQCfYzmJ qKJ4D4P+ppgAGmL3d8A8D9o= =6Xoc -----END PGP SIGNATURE-----
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =========================================== web : www.cmsinter.net email: tim@cmsinter.net phone: 989.235.5100 x222 fax : 989.235.5151
participants (4)
-
Kirti S. Bajwa -
Lewis Bergman -
Mike Dappert -
Timothy C. Bohen