Paul- Sounds like the exact same problem I had a few days ago that Jeff answered for the list. Call telco and have them tell you what signaling method the PRI is set to. It needs to be 5ESSCustom. -- Scot ----- Original Message ----- From: Paul Farber <farber@admin.f-tech.net> To: <usr-tc@lists.xmission.com> Sent: Friday, February 04, 2000 12:25 PM Subject: (usr-tc) Hard Soft busy out commands

Hello all

Trying to test individual channels on a new PRI.

Whenever I selected a group of modems and either hard or soft busied them out (to test the hunt group), I would get busy, and not sequence through the huntgroup to the next open modem.

All channels are up, am I not using the busy out commands correctly or will the hard/soft busy out 'break' a huntgroup?

Thanks!

Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.