*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello. had anyone experienced problems with modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper ARC. The problem is sometimes when the dialup users are tx/rx something, the user's modems just stops to receive for a while (1 minute aprox). Then, the tx/rx flow continues. At the begining blamed the sites the users visit, but this stalls happen also with the servers in the same lan segment where the Hiper ARC resides. Any ideas what should be happening? Thanks -- Sergio Gonzalez Calle 100 #8A-55 Torre C oficina 711 sagonzal@sky.net.co NOC- SkyNet de Colombia. (57) +1 6422020 (57) +3 2277871 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Could be a retrain/renegotiations. Fire up TCM and see if the link is falling forward/back or has renegotiations/retrains. Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Wed, 10 May 2000, Sergio Gonzalez wrote:
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello. had anyone experienced problems with modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper ARC. The problem is sometimes when the dialup users are tx/rx something, the user's modems just stops to receive for a while (1 minute aprox). Then, the tx/rx flow continues. At the begining blamed the sites the users visit, but this stalls happen also with the servers in the same lan segment where the Hiper ARC resides.
Any ideas what should be happening?
Thanks -- Sergio Gonzalez Calle 100 #8A-55 Torre C oficina 711 sagonzal@sky.net.co NOC- SkyNet de Colombia. (57) +1 6422020 (57) +3 2277871
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Another likely culprit is having an MTU mismatch between the HiPerArc and the clients. Jeff Binkley ASA Network Computing u>Could be a retrain/renegotiations. Fire up TCM and see if the link is u>falling forward/back or has renegotiations/retrains. u>Paul Farber u>Farber Technology u>farber@admin.f-tech.net u>Ph 570-628-5303 u>Fax 570-628-5545 u>On Wed, 10 May 2000, Sergio Gonzalez wrote: u>> *This message was transferred with a trial version of u>> CommuniGate(tm) Pro* Hello. had anyone experienced problems with u>> modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper u>> ARC. The problem is sometimes when the dialup users are tx/rx u>> something, the user's modems just stops to receive for a while (1 u>> minute aprox). Then, the tx/rx flow continues. At the begining u>> blamed the sites the users visit, but this stalls happen also with u>> the servers in the same lan segment where the Hiper ARC resides. u>> Any ideas what should be happening? u>> Thanks u>> -- u>> Sergio Gonzalez u>> Calle 100 #8A-55 Torre C oficina 711 u>> sagonzal@sky.net.co u>> NOC- SkyNet de Colombia. u>> (57) +1 6422020 u>> (57) +3 2277871 u>> - u>> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u>> with "unsubscribe usr-tc" in the body of the message. u>> For information on digests or retrieving files and old messages u>> send "help" to the same address. Do not use quotes in your u>> message. u>- u> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u> with "unsubscribe usr-tc" in the body of the message. u> For information on digests or retrieving files and old messages send u> "help" to the same address. Do not use quotes in your message. u> CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
shouldn't that be part of the ppp negotiation? Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Wed, 10 May 2000, Jeff Binkley wrote:
Another likely culprit is having an MTU mismatch between the HiPerArc and the clients.
Jeff Binkley ASA Network Computing
u>Could be a retrain/renegotiations. Fire up TCM and see if the link is u>falling forward/back or has renegotiations/retrains.
u>Paul Farber u>Farber Technology u>farber@admin.f-tech.net u>Ph 570-628-5303 u>Fax 570-628-5545
u>On Wed, 10 May 2000, Sergio Gonzalez wrote:
u>> *This message was transferred with a trial version of u>> CommuniGate(tm) Pro* Hello. had anyone experienced problems with u>> modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper u>> ARC. The problem is sometimes when the dialup users are tx/rx u>> something, the user's modems just stops to receive for a while (1 u>> minute aprox). Then, the tx/rx flow continues. At the begining u>> blamed the sites the users visit, but this stalls happen also with u>> the servers in the same lan segment where the Hiper ARC resides.
u>> Any ideas what should be happening?
u>> Thanks u>> -- u>> Sergio Gonzalez u>> Calle 100 #8A-55 Torre C oficina 711 u>> sagonzal@sky.net.co u>> NOC- SkyNet de Colombia. u>> (57) +1 6422020 u>> (57) +3 2277871
u>> - u>> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u>> with "unsubscribe usr-tc" in the body of the message. u>> For information on digests or retrieving files and old messages u>> send "help" to the same address. Do not use quotes in your u>> message.
u>- u> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u> with "unsubscribe usr-tc" in the body of the message. u> For information on digests or retrieving files and old messages send u> "help" to the same address. Do not use quotes in your message.
u>
CMPQwk 1.42 9999
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
What Hiper DSP Code and Hiper Arc Code are you running? Clint R. Sparks ComQuest Internet Services csparks@cqc.com ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "usr" <usr-tc@lists.xmission.com> Sent: Wednesday, May 10, 2000 12:48 AM Subject: (usr-tc) Stalling modems.
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello. had anyone experienced problems with modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper ARC. The problem is sometimes when the dialup users are tx/rx something, the user's modems just stops to receive for a while (1 minute aprox). Then, the tx/rx flow continues. At the begining blamed the sites the users visit, but this stalls happen also with the servers in the same lan segment where the Hiper ARC resides.
Any ideas what should be happening?
Thanks -- Sergio Gonzalez Calle 100 #8A-55 Torre C oficina 711 sagonzal@sky.net.co NOC- SkyNet de Colombia. (57) +1 6422020 (57) +3 2277871
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (4)
-
Clint R. Sparks -
jeff.binkleyļ¼ asacomp.com -
Paul Farber -
Sergio Gonzalez