After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it? Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Kirk- I have .49 and .54 DSP's, all running 2.0.51 for over 2 months without incident. I think it's the latest DSP code right now. -- Scot NJAccess
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of K Mitchell Sent: Saturday, March 18, 2000 11:37 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) hung modems return
After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it?
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
We have noticed with 2.0.51 that people are complaining that their connection hangs like on web sites they are browsing. I called 3 Com about it and they said they have been hearing complaints about this and advised unless running DSP's with hardware revision 0.55 to go back to Hiper DSP code 2.0.60. So I switched them to see what happens. My complaints were mounting on this problem and before going to 2.0.51 back in December I had not had any complaints about this. Has anyone heard any complaints about this problem with your customers? It could be related to the switch type it is attached to which ours is a GTE GTD5 switch and we have to set our PRI's up in the Hiper DSP's as NI1 for switch type. Clint R. Sparks ComQuest Internet Services csparks@cqc.com ----- Original Message ----- From: "Scot Desort" <scot@njaccess.net> To: <usr-tc@lists.xmission.com> Sent: Sunday, March 19, 2000 3:21 AM Subject: RE: (usr-tc) hung modems return
Kirk-
I have .49 and .54 DSP's, all running 2.0.51 for over 2 months without incident. I think it's the latest DSP code right now.
-- Scot NJAccess
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of K Mitchell Sent: Saturday, March 18, 2000 11:37 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) hung modems return
After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it?
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
We run 2.0.51...........no regrets, its definitly the way to go right now. On Sun, 19 Mar 2000, Scot Desort wrote:
Kirk-
I have .49 and .54 DSP's, all running 2.0.51 for over 2 months without incident. I think it's the latest DSP code right now.
-- Scot NJAccess
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of K Mitchell Sent: Saturday, March 18, 2000 11:37 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) hung modems return
After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it?
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Okay someone must have come across this one. I am doing a default-route option from my steel belted radius and it looks like it is ingnoring the attribute. The syntax I am using is 208.148.52.64/29 208.148.52.65 1 It is not working on my hiper arc or my cisco 5300's. Any ideas? Thanks, Brian Gordon Network Admin Westelcom Internet - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (5)
-
Brian -
Brian Gordon -
Clint R. Sparks -
K Mitchell -
Scot Desort