Anyone have or know of where one can find a current listing of all 3Com VSA's? - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
This may work for you: http://totalservice.3com.com/ISP/rad/vendor.html das vanhalen@coredcs.com (vanhalen@coredcs.com) spake:
Anyone have or know of where one can find a current listing of all 3Com VSA's?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I have tried the "totalsupport" 3COM site and the download date has expired on this software. I have the little contract, but I can not get a copy of this code (DSP). ANYone have an idea? Jason A. Nunnelley President of Linkfast Internet Services, Linkfast Inc. 256-739-2008 VOICE CONTACT Linkfast Labs, GPN, MFG, MentionMe Studios, and, the Stupid Project http://www.linkfast.net http://www.lynkfast.com http://www.getpaidnet.com http://www.myfriendgeek.com http://www.mentionme.com http://www.helpimstupid.com - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
OK... I asked this in this forum earlier and it started a long thread of discussion about the different code congif, but I never got an answer. Are there any "GOTCHAS" when moving from 4.1.59-6 to 4.1.22? And is it safe to load the 2.0.51 code over the 2.0.81 code? I have seen all the comments about rev #'s, but still no comment on whether the above combination of code is "STABLE" Saw a couple of posts that "SETTINGS" were lost on the HiperArc after loading the 4.1.22 code? Would like to hear, private email if you like or to the list about the above software! Thanks again! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I did a 4.1.59-6 to 4.1.22 and nothing went wrong. It's mainly for the DOS against the ARC and a SNMP read fix. Some new VSA's and disconnect attributes. Seems that 3Com is really doing a lot of work with DNIS..... anybody use that stuff???? Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Sat, 15 Jan 2000 pferraro@wna-linknet.com wrote:
OK... I asked this in this forum earlier and it started a long thread of discussion about the different code congif, but I never got an answer. Are there any "GOTCHAS" when moving from 4.1.59-6 to 4.1.22? And is it safe to load the 2.0.51 code over the 2.0.81 code?
I have seen all the comments about rev #'s, but still no comment on whether the above combination of code is "STABLE" Saw a couple of posts that "SETTINGS" were lost on the HiperArc after loading the 4.1.22 code?
Would like to hear, private email if you like or to the list about the above software!
Thanks again!
============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ==============================================================================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Paul Farber wrote:
I did a 4.1.59-6 to 4.1.22 and nothing went wrong. It's mainly for the DOS against the ARC and a SNMP read fix.
Some new VSA's and disconnect attributes. Seems that 3Com is really doing a lot of work with DNIS..... anybody use that stuff????
Oh yeah, that's one more thing I ran into when I converted to 4.1.22, the VSA for framed_local_IP_Address in my dictionary file for SA 6.0.8 was set to a string type and it stopped working properly in the HiPer ARC, I had to change it as a ipaddr type. But it was the RIP problems what made me back off to 4.1.59-6. -Ron GLISnet, Inc. +1 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Ronald Kushner |Sent: Saturday, January 15, 2000 1:08 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) HiperArc 4.1.22 and DSP 2.0.51 | | |Paul Farber wrote: |> |> I did a 4.1.59-6 to 4.1.22 and nothing went wrong. It's mainly for the |> DOS against the ARC and a SNMP read fix. |> |> Some new VSA's and disconnect attributes. Seems that 3Com is |really doing |> a lot of work with DNIS..... anybody use that stuff???? | |Oh yeah, that's one more thing I ran into when I converted to 4.1.22, the |VSA for framed_local_IP_Address in my dictionary file for SA 6.0.8 was set |to a string type and it stopped working properly in the HiPer ARC, I had to |change it as a ipaddr type. But it was the RIP problems what made me back |off to 4.1.59-6. | RIP Problems?? Did you post the details here?? Can you post a detailed example of your configs and exactly what RIP was doing/not doing ?? thanks, M - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
At 01:45 PM 1/15/00 -0500, you wrote:
I did a 4.1.59-6 to 4.1.22 and nothing went wrong. It's mainly for the DOS against the ARC and a SNMP read fix.
Some new VSA's and disconnect attributes. Seems that 3Com is really doing a lot of work with DNIS..... anybody use that stuff????
We use DNIS for on the fly modem reconfiguraitons. Works quite well actually. We defined a separate number for each of our pops that disables v.90/x2,v.42/bis, etc... Forces a plain v.34 connect - usefull for people who need to get a stable connection to download new drivers for their crappy winmodems. The original idea came from Lon Stockton quite some time ago. Thats about all we use DNIS for. We're going to probably start using it for numbered relams for a wholesale service we're going to be providing. We've got half a dozen POPs around Southwestern Ontario, and 35 rate centers in Southeastern Michigan, and giving the customer their own number would be nice.
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545
On Sat, 15 Jan 2000 pferraro@wna-linknet.com wrote:
OK... I asked this in this forum earlier and it started a long thread of discussion about the different code congif, but I never got an answer. Are there any "GOTCHAS" when moving from 4.1.59-6 to 4.1.22? And is it safe to load the 2.0.51 code over the 2.0.81 code?
I have seen all the comments about rev #'s, but still no comment on whether the above combination of code is "STABLE" Saw a couple of posts that "SETTINGS" were lost on the HiperArc after loading the 4.1.22 code?
Would like to hear, private email if you like or to the list about the above software!
Thanks again!
==============================================================================
Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269
==============================================================================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
--- Clayton Zekelman Managed Network Systems Inc. (MNSi) 875 Ouellette Avenue Windsor, Ontario N9A 4J6 tel. 519-985-8410 fax. 519-258-3009 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
On Sun, 16 Jan 2000, Clayton Zekelman wrote:
Some new VSA's and disconnect attributes. Seems that 3Com is really doing a lot of work with DNIS..... anybody use that stuff????
We use DNIS for on the fly modem reconfiguraitons. Works quite well actually. We defined a separate number for each of our pops that disables v.90/x2,v.42/bis, etc... Forces a plain v.34 connect - usefull for people who need to get a stable connection to download new drivers for their crappy winmodems.
We do that too, except we also have a third number that goes all the way down to 9600 bps for people stuck with mode 2 SLC's. We based it on Lon Stockton's stuff too. Handy stuff for all those Rockwell HCF problems... I've got our setup documents on my usrtoys web page. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (9)
-
Clayton Zekelman -
D A Substanley -
Jason A. Nunnelley -
Mike Andrews -
Mike Wronski -
Paul Farber -
pferraro@wna-linknet.com -
Ronald Kushner -
vanhalen@coredcs.com