(usr-tc) Radius and VPN-Neighbor
I am having some difficulty getting VPN-Neighbor to work. My setup is as follows: HyperArc Version: 4.2.32 IEA Next Hop Routing: ENABLED IEA Send Unsolicited Proxy Arp: DISABLED IEA Force Next Hop Route: DISABLED IP proxy ARP for all dialin addresses: DISABLED IP RIP Flags: METRICS SEND_REQUEST I am using an altered version of Livingston's 2.1 Radius. On the Livingston side it _appears_ that the VPN-Neighbor attribute is being sent: Thu Feb 3 11:29:14 2000: [24758] sending accept to 198.144.34.36/1645.66 Thu Feb 3 11:29:14 2000: [24758] Service-Type = Framed-User Thu Feb 3 11:29:14 2000: [24758] Framed-Protocol = PPP Thu Feb 3 11:29:14 2000: [24758] USR-PW_VPN_Neighbor = 198.144.34.46 Thu Feb 3 11:29:14 2000: [24758] Framed-IP-Address = 255.255.255.254 Thu Feb 3 11:29:14 2000: [24758] Framed-MTU = 1500 Thu Feb 3 11:29:14 2000: [24758] message sent to 198.144.34.36/1645.66 code=2, length=50 But when I am doing a "mon radius" for the user on the USR box it only shows receipt of all of the attributes with the _exception_ of the VPN Neighbor attribute. Does "mon radius" show all attributes transmitted, or only those that are acted on or understood? I'd like to know if the VPN-Neighbor attribute is even being transmitted (although from the Radius stats, it looks like it is.) Thanks! -- ----- G Douglas Davidson | CityNet, Inc. douglas@city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
What attribute id are you using. I have used: VENDORATTR 429 USR-VPN-Neighbor 36872 ipaddr successfully. It has to be one hop away to work however. On Thu, 3 Feb 2000, G. Douglas Davidson wrote:
I am having some difficulty getting VPN-Neighbor to work. My setup is as follows:
HyperArc Version: 4.2.32 IEA Next Hop Routing: ENABLED IEA Send Unsolicited Proxy Arp: DISABLED IEA Force Next Hop Route: DISABLED IP proxy ARP for all dialin addresses: DISABLED
IP RIP Flags: METRICS SEND_REQUEST
I am using an altered version of Livingston's 2.1 Radius. On the Livingston side it _appears_ that the VPN-Neighbor attribute is being sent:
Thu Feb 3 11:29:14 2000: [24758] sending accept to 198.144.34.36/1645.66 Thu Feb 3 11:29:14 2000: [24758] Service-Type = Framed-User Thu Feb 3 11:29:14 2000: [24758] Framed-Protocol = PPP Thu Feb 3 11:29:14 2000: [24758] USR-PW_VPN_Neighbor = 198.144.34.46 Thu Feb 3 11:29:14 2000: [24758] Framed-IP-Address = 255.255.255.254 Thu Feb 3 11:29:14 2000: [24758] Framed-MTU = 1500 Thu Feb 3 11:29:14 2000: [24758] message sent to 198.144.34.36/1645.66 code=2, length=50
But when I am doing a "mon radius" for the user on the USR box it only shows receipt of all of the attributes with the _exception_ of the VPN Neighbor attribute.
Does "mon radius" show all attributes transmitted, or only those that are acted on or understood? I'd like to know if the VPN-Neighbor attribute is even being transmitted (although from the Radius stats, it looks like it is.)
Thanks!
-- ----- G Douglas Davidson | CityNet, Inc. douglas@city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Brian -
G. Douglas Davidson