I have solved the problem. With Richard's mentioning of www.compaq.com, I searched the newsgroups and did some testing, and found I had at some time in the past changed the framed-mtu for myself to 500 for some unknown reason. Apparently, the portmasters I have are not reading the framed-mtu setting, but the TC is. Luckily, I was the only one with this problem. Thanks for everyone's help. Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX *********** REPLY SEPARATOR *********** On 2/10/2000 at 8:31 AM Colin Wantling wrote:

Tom,

does the problem go away if you set the framed MTU size to 1500 on Radius (or set MTU to 1500 on HiperArc if no Radius)?

Colin Wantling

Enertel, Zwolle Netherlands

I am a new migrator to TC's from PM3's. I still have 4 of the PM3's. I use Quicken from home to balance my checking account and to do online payments, and I found out this morning that if I am connected thru a PM3, it connects to the host server just fine, but if I'm connected to my TC, then it just times out and will not connect. Has anyone ever seen this or could tell me what ports this might be running on?

Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.