(usr-tc) Modems not answering on Dual PRI card
Hello all, I've got a perplexing problem with a dual-pri card feeding into quads. The circuit is set up good signal. Telco shows that they are handing calls to the PRI but they are being refused by my chassis. Line interface is set to pritdm, all ds0's show in service. Dunno where else to check... any ideas? -Eric - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 If you have everything ok at your telco... (the D-channel is up and the span 1 status is F1 (operational)) Maybe... you just forgive enable all modems in the s# ports.. or set active all modems. IMHO. Greetings, Jorge Lozano M. - ----- Original Message ----- From: Eric Forcey <eric@psnw.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, March 21, 2000 10:46 PM Subject: (usr-tc) Modems not answering on Dual PRI card
Hello all,
I've got a perplexing problem with a dual-pri card feeding into quads.
The circuit is set up good signal. Telco shows that they are handing calls to the PRI but they are being refused by my chassis.
Line interface is set to pritdm, all ds0's show in service.
Dunno where else to check... any ideas?
-Eric
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com> iQA/AwUBONrcxqp3oywyFVUlEQImfQCg2m93UdBdpUffJl17Dv8Q1daIjoYAoNGW ix4hb5IQe7KSh9KuOK0C5tim =5TKe -----END PGP SIGNATURE----- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
hi, Eric Forcey wrote:
Hello all,
I've got a perplexing problem with a dual-pri card feeding into quads.
The circuit is set up good signal. Telco shows that they are handing calls to the PRI but they are being refused by my chassis.
Line interface is set to pritdm, all ds0's show in service.
Dunno where else to check... any ideas?
Check: 1) Modem takes phone signal from Dual PRI (AT%D?). 2) Dual PRI: card can see modem's cards. 2) Modems are on packet bus (sho all - A R P).
-Eric
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- _______________________________________________ Vadim. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Eric Forcey -
Jorge Lozano -
Vadim Tulinov