Problem with old interfaces (Quad Digital V.34 Modem)
Hello. I have a strange problem with old interfaces (sl 2 to 8). HiPer ARC defines their presence : HiPer>> li chass Slot Owner Description Ports Type Console 1 YES Primary Rate T1 NAC 0 DYNAMIC NO 2 YES Quad Digital V.34 Modem 4 DYNAMIC NO <skip> 8 YES Quad Digital V.34 Modem 4 DYNAMIC NO 9 YES --EMPTY-- 0 STATIC NO 10 YES --EMPTY-- 0 STATIC NO 11 YES 30 Channel High Density Modem 30 DYNAMIC YES 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES --EMPTY-- 0 STATIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO But all interfaces in Operation Status Down mode: HiPer>> li int INTERFACES Interface Oper Admin Name Status Status SLOT:11/CON:1 Up Up eth:1 Down Up eth:2 Up Up internal Up Up loopback Up Up slot:2/mod:1 Down Up slot:2/mod:2 Down Up <skip> slot:8/mod:3 Down Up slot:8/mod:4 Down Up slot:11/mod:1 Up Up slot:11/mod:2 Up Up <skip> slot:11/mod:29 Up Up slot:11/mod:30 Up Up All indicators on TC is "green". Calls from telco come on to the device and I see allocations of modems on indicators of Quad Modem cards. Somebody can help with ideas ? -- Regards, Sergey
Do they become enabled after issuing a "enable modem_group slot:x" You can do a list modem_groups to see the naming scheme. Todd ----- Original Message ----- From: "Sergey" <a_s_y@sama.ru> To: <usr-tc@mailman.xmission.com> Sent: Saturday, December 04, 2004 5:07 AM Subject: [USR-TC] Problem with old interfaces (Quad Digital V.34 Modem)
Hello.
I have a strange problem with old interfaces (sl 2 to 8). HiPer ARC defines their presence :
HiPer>> li chass Slot Owner Description Ports Type Console 1 YES Primary Rate T1 NAC 0 DYNAMIC NO 2 YES Quad Digital V.34 Modem 4 DYNAMIC NO <skip> 8 YES Quad Digital V.34 Modem 4 DYNAMIC NO 9 YES --EMPTY-- 0 STATIC NO 10 YES --EMPTY-- 0 STATIC NO 11 YES 30 Channel High Density Modem 30 DYNAMIC YES 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES --EMPTY-- 0 STATIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO
But all interfaces in Operation Status Down mode: HiPer>> li int
INTERFACES Interface Oper Admin Name Status Status SLOT:11/CON:1 Up Up eth:1 Down Up eth:2 Up Up internal Up Up loopback Up Up slot:2/mod:1 Down Up slot:2/mod:2 Down Up <skip> slot:8/mod:3 Down Up slot:8/mod:4 Down Up slot:11/mod:1 Up Up slot:11/mod:2 Up Up <skip> slot:11/mod:29 Up Up slot:11/mod:30 Up Up
All indicators on TC is "green". Calls from telco come on to the device and I see allocations of modems on indicators of Quad Modem cards.
Somebody can help with ideas ?
-- Regards, Sergey
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
On Monday 06 December 2004 17:46, Todd Bertolozzi wrote:
Do they become enabled after issuing a "enable modem_group slot:x"
This command influences on Admin Status. Isn't it ? But "Admin Status" is Up: INTERFACES Interface Oper Admin Name Status Status SLOT:11/CON:1 Up Up eth:1 Down Up eth:2 Up Up internal Up Up loopback Up Up slot:2/mod:1 Down Up slot:2/mod:2 Down Up slot:2/mod:3 Down Up slot:2/mod:4 Down Up slot:3/mod:1 Down Up slot:3/mod:2 Down Up slot:3/mod:3 Down Up slot:3/mod:4 Down Up slot:4/mod:1 Down Up <skip> :-(
You can do a list modem_groups to see the naming scheme.
HiPer>> list modem_groups MODEM GROUPS Number of GROUP Interfaces all 58 old 32 slot:2 4 slot:3 4 slot:4 4 slot:5 4 slot:6 4 slot:7 4 slot:8 4 nomodem 0 slot:11 30 incoming 29 outgoing 1 virt_dyn 58 slot:2/span:1 4 slot:3/span:1 4 slot:4/span:1 4 slot:5/span:1 4 slot:6/span:1 4 slot:7/span:1 4 slot:8/span:1 4 slot:11/span:1 30 I tried commands disable modem_group all enable modem_group all but only slot:11 reacts to commands. -- Regards, Sergey
On Tuesday 07 December 2004 14:54, Sergey wrote:
Do they become enabled after issuing a "enable modem_group slot:x"
This command influences on Admin Status. Isn't it ? But "Admin Status" is Up:
slot:2/mod:1 Down Up slot:2/mod:2 Down Up slot:2/mod:3 Down Up slot:2/mod:4 Down Up slot:3/mod:1 Down Up slot:3/mod:2 Down Up slot:3/mod:3 Down Up
One more note. Calling from telco reach to modems: I can see it on Quad modems led. -- Regards, Sergey
If I recall you can map the modems on the quads to the ds0's. Can't remember exactly how to do that off the top without looking at TCM. That might be your issue. You may also want to try and reset the problem cards back to factory settings or copy all the settings from a good card over to the problem cards. Todd ----- Original Message ----- From: "Sergey" <a_s_y@sama.ru> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, December 07, 2004 6:25 AM Subject: Re: [USR-TC] Problem with old interfaces (Quad Digital V.34 Modem)
On Tuesday 07 December 2004 14:54, Sergey wrote:
Do they become enabled after issuing a "enable modem_group slot:x"
This command influences on Admin Status. Isn't it ? But "Admin Status" is Up:
slot:2/mod:1 Down Up slot:2/mod:2 Down Up slot:2/mod:3 Down Up slot:2/mod:4 Down Up slot:3/mod:1 Down Up slot:3/mod:2 Down Up slot:3/mod:3 Down Up
One more note. Calling from telco reach to modems: I can see it on Quad modems led.
-- Regards, Sergey
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
On Tuesday 07 December 2004 18:09, Todd Bertolozzi wrote:
If I recall you can map the modems on the quads to the ds0's. Can't
All maped :-(
might be your issue. You may also want to try and reset the problem cards back to factory settings or copy all the settings from a good card over to the problem cards.
I have not good Quad modem cards (all other is HiPer DSP). And I cannot find how set factory settings on Quad Modems. :-( -- Regards, Sergey
participants (2)
-
Sergey -
Todd Bertolozzi