Re: (usr-tc) MIB OID for Frequency attenuation
Try .1.3.6.1.4.1.429.1.6.9.1.1.75 and .1.3.6.1.4.1.429.1.6.9.1.1.76. 75 will give you the frequencies and 76 will give you the values (in negative tenths of a DB). Steve Valiunas "Campbell Simpson" <Campbell.Simpson@telecom.co.nz> on 01/16/2000 04:04:02 PM Please respond to usr-tc@lists.xmission.com Sent by: "Campbell Simpson" <Campbell.Simpson@telecom.co.nz> To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) MIB OID for Frequency attenuation Hi I was wondering if anyone could help me find the OID for the mib that records the frequency attenuation response for the TCH modems (equivalent of ATY11). Been looking for ages and can't seem to find the right OID. Thanks Campbell Simpson - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Be warned that some versions of HiPer DSP code won't return an accurate list of frequencies. (All zeroes, if I remember right.) The Quads will. The values are all OK though. If you can't get the frequencies, they start at 150 hz and go up to 3750 hz in steps of 150. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." On Sun, 16 Jan 2000, Steve Valiunas wrote:
Try .1.3.6.1.4.1.429.1.6.9.1.1.75 and .1.3.6.1.4.1.429.1.6.9.1.1.76. 75 will give you the frequencies and 76 will give you the values (in negative tenths of a DB).
Steve Valiunas
"Campbell Simpson" <Campbell.Simpson@telecom.co.nz> on 01/16/2000 04:04:02 PM
Please respond to usr-tc@lists.xmission.com
Sent by: "Campbell Simpson" <Campbell.Simpson@telecom.co.nz>
To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) MIB OID for Frequency attenuation
Hi
I was wondering if anyone could help me find the OID for the mib that records the frequency attenuation response for the TCH modems (equivalent of ATY11). Been looking for ages and can't seem to find the right OID.
Thanks
Campbell Simpson
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Mike Andrews -
Steve Valiunas