To remove the password from your DSP's - in Total Control Manager - 1. Select the whole DSP card 2. Configure -> Actions/Command -> Software -> Restore UI Password from Default 3. Not sure if necessary, but then I'd do a "Save T1/E1 Modems to NVRAM" and reset the card. your password should be cleared.
Thanks a lot. Joel - Fox Computers wrote:
To remove the password from your DSP's -
in Total Control Manager -
1. Select the whole DSP card 2. Configure -> Actions/Command -> Software -> Restore UI Password from Default 3. Not sure if necessary, but then I'd do a "Save T1/E1 Modems to NVRAM" and reset the card. your password should be cleared.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (2)
-
alex -
Joel - Fox Computers