HiperDSP with E1/R2 code v3.1.7 suddenly went dead after a power cycle in a chassis ( scheduled maintenance shutdown ). RN/FL LED is red with some amber LED in the utilization LED, so most definitely this module is dead. Tried to do a console download, the card accepts the download but fails on the boot-up process. Ok now its really a hardware failure, looking to take some positive actions in this situations, can anybody in this list tell me the meaning of this error message/code? Or is there anybody from Commworks looking in this mailing list provide me an answer, it will be a most welcome one. Here's the error code: !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... Diagnostic Power-Up Failure Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-8-26-1 Expected Data -> f000000c Received Data -> 7000000c Text Message -> Address Equals Data Test Failure Info Message -> Second read failed. Hard error indicated. -- Best regards, Gen ================================== Gen Camiling Chief Technical Officer International Micro Village, Inc. PHILIPPINES (63)(2) 7512130 mailto:gcamiling@imvi.com.ph ==================================