Re: (usr-tc) NMC NAC troubles + Passwords

20 Oct 1999

      You won't be able to use the dual v.35 nics behind an NMC-  You might get the
console up but I doubt if you'll ever get it to talk on the ethernet port.
The Passwords are the community strings.  They can be disabled after you get in
with a menu option.  If you can't get past the password then try flipping
dipSwitch #6 up, that should bypass them.
  The red/green LED means that the NMC didn't see a network connection when it
booted up.

Steve

Dataheart <lists@dataheart.net> on 10/20/99 06:12:25 AM

Please respond to usr-tc@lists.xmission.com

Sent by:  Dataheart <lists@dataheart.net>

To:   usr-tc@lists.xmission.com
cc:    (Steve Valiunas/MW/US/3Com)
Subject:  (usr-tc) NMC NAC troubles + Passwords

Howdy,

1. For my NMC I have a High Speed WAN/ Ethernet NIC, which has the
console at the top then 2 v.35 then the 10BaseT at the bottom the seller
told me that they were pulled from a working system, they mush have been
used for Netservers because thats where the jumper was set to when they
arrived.
So I changed the jumper from NAC to NMC then inserted the NMC and it
powers up with the Hub Status light red, the rn/fl light flashing
between red and green and USR written on the 4 character display.

I know the NMC works I have had it working in another rack.

is there anything special I have to do when changing the High Speed
WAN/Ethernet NIC from a netserver to a NMC. New code or something.
Also when this is happening I get nothing on the console

2. I have a NMC with a password on the console. is there any way to
erase this password.

Thank you all,
Aaron

-
 To unsubscribe to usr-tc, send an email to "majordomo@xmission.com"
 with "unsubscribe usr-tc" in the body of the message.
 For information on digests or retrieving files and old messages send
 "help" to the same address.  Do not use quotes in your message.

Steve Valiunas

tags

participants (1)