-----Original Message----- From: Support [mailto:support@inet2000.com] I'm looking for 10 ports (20 x 64K Channels). Right now I'm using Total Control I-Modem 8i which are basically simple modems with serial ports that are plugged into an NT server and a multi-serial (Equinox) card. That's actually how we started offering 56K service years ago - it's a way to add ports a couple lines at a time, rather than 24 at a time with PRI/T1. There are also the SuperStack 1500's that can use BRI lines to provide V.90 dialin, but since I have the chassis now, I was hoping to move everything into that chassis so I'd have one management interface. The NT/RAS solution I have is working well, but I've got my T1's in the Total Control Chassis and then these 16 BRI channels in the NT box and it's two separate user databases and two separate log files for billing, etc. ----- Original Message ----- Todd, You can look at getting an Atlas 800 [adtran] with some BRI modules on that. That way you can trunk BRI into that box, and then pass over a PRI/T1 to your TC-HUB. We have one setup in our lab, and it functions wonderfully. You could even probably find a used one somewhere pretty cheap! Thanks, Brian Smith CCNA, NCSA Network Support Engineer SOLUSERVE www.solunet.com 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905 (888)449-5766 fax: (321)-676-1287