The address pool defined is more than enough for the number of ports on this chassis. I don't see this often, but wasn't sure of the root cause for this happening. Thanks. cheryl ----- Original Message ----- From: Blake Fithen <fithen@NetworksPlus.com> To: <usr-tc@lists.xmission.com> Sent: Thursday, February 03, 2000 1:29 AM Subject: RE: (usr-tc) User problems completing session

I believe one of the reasons this happens is when you do not have enough addresses in your defined pool.

blake

-----Original Message----- From: Cheryl Johnson [mailto:netadmin@seidata.com] Sent: Wednesday, February 02, 2000 3:09 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) User problems completing session

Anyone seen this before? Unexpected (IPCP) Layer Down, ID 1, Restarting Link 20963392, for <username>. It sounds like a modem issue on the user side.

-Cheryl SEI Data Network Service, Inc A Division of SEI Communications

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.