Found out what the problem was -- I was telneted into the HARC from some other location, logged in as adm. The system would not read the new password until I logged that telnet session out. I was able to use 'set adm password xxx', save all, log the other session out, then login with the new password. Thanks to all who helped! -- Scot

-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Florin_Neamtu@3com.com Sent: Tuesday, July 18, 2000 1:13 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Security questions

do this:

del user adm save all add user adm pass xxx type manage save all

logout

login

with new password. should work

Reagrds,

florin

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.