That's the first thing I did when I ran into the problem. I even verified the secrets on the HipeArc using the _show accounting radius secret. Anyone have any other suggestions? Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 -----Original Message----- From: Steve Valiunas [mailto:Steve_Valiunas@mw.3com.com] Sent: Monday, January 10, 2000 8:44 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) IAS accounting problem with HiperArc Check your secondary-server's shared secret. STeve Valiunas USRobotics TC Mailing List <USRoboticsTCMailingList@imagenisp.com> on 01/09/2000 03:01:53 PM Please respond to usr-tc@lists.xmission.com Sent by: USRobotics TC Mailing List <USRoboticsTCMailingList@imagenisp.com> To: "USRobotics TC Mailing List cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) IAS accounting problem with HiperArc I am having a problem with my HiperArc and accounting using Microsoft IAS. I have my first accounting server specified as the primary accounting server, and everything is working fine as is. The problem I'm having is related to my second server, which I intend to use as a backup in case the first one goes down. When my second server is set as the secondary server, everything works okay. However, when I have my second server set as the primary first backup, no accounting records are recorded and the NT event log is full of malformed packets. What is different about the packets when they are sent to the server configured as the primary first backup versus the secondary? My other chassis which runs a NSC has no problem at all with the second server. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.