There are two different styles of e1 NAC - one has 30 dsp's on board, the otehr is a t1 NAC with a 6 dsp daughter board..... Regards, Richard ----- Original Message ----- From: "Jeff Lynch" <jeff@mercury.jorsm.com> To: "Richard Ham" <richard@cust.caloundra.net> Cc: <usr-tc@lists.xmission.com> Sent: Thursday, December 06, 2001 1:03 PM Subject: Re: [USR-TC] Hiperdsp upgrade On Thu, 6 Dec 2001, Richard Ham wrote:

How many modem dsp's are there on the card??

If you've got one with a daughter board, or with 30 dsp's, its unlikely that you'll ever get it to behave with t1 code, as its the e1 style...

If it is the e1 style with daughter board, you can remove the daughter board (and sell it to one of us aussies - we can't get enough of them!!!!) and it'll flash to t1....

This is the first time I've heard there are hardware differences between the T1/E1 HDSPs. I was here when they first came out and all the buzz was that the hardware was the same, only the flash different. A daughter card perhaps on the E1, eh? --jeff

Regards,

Richard

----- Original Message ----- From: "Jeff Lynch" <jeff@mercury.jorsm.com> To: <usr-tc@lists.xmission.com> Sent: Thursday, December 06, 2001 8:16 AM Subject: [USR-TC] Hiperdsp upgrade

We bought a used HiperDSP flashed with E1 version of the code. We're trying to put the T1 code on it but TCM is not letting us. It looks like it doesn't want to accept the T1 NAC/DMF file for this slot. How do we force TCM to overwrite E1 code with the T1 code?

--jeff

============================================================================

Jeffrey A. Lynch | JORSM Internet, Regional Internet Services email: jeff@jorsm.com | 7 Area Codes in Chicagoland and NW Indiana Voice: (219)322-2180 | 100Mbps+ Connectivity, 56K-DS3, V.90, ISDN Autoresponse: info@jorsm.com | Quality Service, Affordable Prices http://www.jorsm.com | Serving Gov, Biz, Residential Since 1995

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

============================================================================ Jeffrey A. Lynch | JORSM Internet, Regional Internet Services email: jeff@jorsm.com | 7 Area Codes in Chicagoland and NW Indiana Voice: (219)322-2180 | 100Mbps+ Connectivity, 56K-DS3, V.90, ISDN Autoresponse: info@jorsm.com | Quality Service, Affordable Prices http://www.jorsm.com | Serving Gov, Biz, Residential Since 1995

I still want to know how to truly get V.92! No one has given a straight forward answer on this bs from 3com. Is it fully operational code yet? If so how do you obtain it and what's the cost involved and so on and so forth. Also why is 3com gouging the ISP's that helped drive this division and give them years of profits and revenue? As you can tell I am a bit disturbed. After the last email to the list in response to TOM GOODMAN's public airings... all fell deathly silent. (once again no word from 3com privately or publicly) Sincerely Upset, -- Ed Taylor