Instead of trying to hit the SNMP OID, the Target line in our MRTG.cfg file looks like this: Target[tch1]: `perl c:\mrtg-2.8.8\run\dualpri.pl public@xxx.xxx.xxx.xxx` so I suggest changing your's to something like: Target[tch1]: `perl c:\mrtg\hiperdsp.pl public@xxx.xxx.xxx.xxx` Note those ` are the apostrophe marks near the 1 key. It's been working like a charm. Thanks, Greg Long Network Admin Coastlink 801-532-6212 ext 32 greg@coastlink.com http://www.coastlink.com
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Steve Cobb Sent: Monday, February 21, 2000 9:04 PM To: usr-tc@lists.xmission.com Cc: mandrews@bit0.com Subject: (usr-tc) MRTG and TCH
(snip)
workdir: f:\inetpub\wwwroot\mrtgnew Unscaled[_]:ymwd
#.....................................................................
Target[tch1]:1.3.6.1.4.1.429.1.27.2.1.26:private@xxx.xxx.xxx.xxx MaxBytes[tch1]: 46 Unscaled[tch1]:ymwd Title[tch1]: Total Control Hub #1 PageTop[tch1]: <H1>TCH1 Modem Utilization </H1> YLegend[tch1]:Modem Capacity Options[tch1]:gauge,growright ShortLegend[tch1]:Modems Legend1[tch1]: Utilization Legend2[tch1]: Capacity Legend3[tch1]: Connections Legend4[tch1]: Capacity LegendI[tch1]: Utilization LegendO[tch1]: Capacity
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
This is right....Mrtg just wants 4 values for graphs....2 numbers (which will be graphed) an up time, and a system name....you can pass it any 2 #'s and it will make graphs of them...I use it to track Quake3 server usage :) -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Long Sent: Tuesday, February 22, 2000 4:25 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) MRTG and TCH Instead of trying to hit the SNMP OID, the Target line in our MRTG.cfg file looks like this: Target[tch1]: `perl c:\mrtg-2.8.8\run\dualpri.pl public@xxx.xxx.xxx.xxx` so I suggest changing your's to something like: Target[tch1]: `perl c:\mrtg\hiperdsp.pl public@xxx.xxx.xxx.xxx` Note those ` are the apostrophe marks near the 1 key. It's been working like a charm. Thanks, Greg Long Network Admin Coastlink 801-532-6212 ext 32 greg@coastlink.com http://www.coastlink.com
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Steve Cobb Sent: Monday, February 21, 2000 9:04 PM To: usr-tc@lists.xmission.com Cc: mandrews@bit0.com Subject: (usr-tc) MRTG and TCH
(snip)
workdir: f:\inetpub\wwwroot\mrtgnew Unscaled[_]:ymwd
#.....................................................................
Target[tch1]:1.3.6.1.4.1.429.1.27.2.1.26:private@xxx.xxx.xxx.xxx MaxBytes[tch1]: 46 Unscaled[tch1]:ymwd Title[tch1]: Total Control Hub #1 PageTop[tch1]: <H1>TCH1 Modem Utilization </H1> YLegend[tch1]:Modem Capacity Options[tch1]:gauge,growright ShortLegend[tch1]:Modems Legend1[tch1]: Utilization Legend2[tch1]: Capacity Legend3[tch1]: Connections Legend4[tch1]: Capacity LegendI[tch1]: Utilization LegendO[tch1]: Capacity
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
David Hamilton -
Greg Long