(usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get: SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) Does anyone know how to make these "modems available"? David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I go in click on the modems adn do a reset. It works for me. Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655 "Duct tape is like the force. It has a light side, a dark side, and holds the universe together." -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton Sent: Wednesday, April 19, 2000 5:02 PM To: Usr-Tc@Lists.Xmission.Com Subject: (usr-tc) modem not available I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get: SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) Does anyone know how to make these "modems available"? David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Sometimes it helps to exchange two cards, reseating the offending one usually does not work. Pull two out and swap them. Occasionally, you have to power down the whole chassis to get the modem back. Had to do one that way today. At 02:44 PM 4/20/00 -0400, you wrote:
I go in click on the modems adn do a reset. It works for me.
Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655
"Duct tape is like the force. It has a light side, a dark side, and holds the universe together."
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton Sent: Wednesday, April 19, 2000 5:02 PM To: Usr-Tc@Lists.Xmission.Com Subject: (usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get:
SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2)
Does anyone know how to make these "modems available"?
David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
All modems on all 12 cards are in this modem not available state.... sigh... -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Coffey Sent: Thursday, April 20, 2000 3:48 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) modem not available Sometimes it helps to exchange two cards, reseating the offending one usually does not work. Pull two out and swap them. Occasionally, you have to power down the whole chassis to get the modem back. Had to do one that way today. At 02:44 PM 4/20/00 -0400, you wrote:
I go in click on the modems adn do a reset. It works for me.
Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655
"Duct tape is like the force. It has a light side, a dark side, and holds the universe together."
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton Sent: Wednesday, April 19, 2000 5:02 PM To: Usr-Tc@Lists.Xmission.Com Subject: (usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get:
SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2)
Does anyone know how to make these "modems available"?
David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Power off the whole box. At 04:00 PM 4/20/00 -0400, you wrote:
All modems on all 12 cards are in this modem not available state.... sigh...
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Coffey Sent: Thursday, April 20, 2000 3:48 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) modem not available
Sometimes it helps to exchange two cards, reseating the offending one usually does not work. Pull two out and swap them. Occasionally, you have to power down the whole chassis to get the modem back. Had to do one that way today.
At 02:44 PM 4/20/00 -0400, you wrote:
I go in click on the modems adn do a reset. It works for me.
Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655
"Duct tape is like the force. It has a light side, a dark side, and holds the universe together."
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton Sent: Wednesday, April 19, 2000 5:02 PM To: Usr-Tc@Lists.Xmission.Com Subject: (usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get:
SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2)
Does anyone know how to make these "modems available"?
David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Are all the modems set to t1Tdm under "Line Interface Options?" At 03:47 PM 4/20/00 , you wrote:
Power off the whole box.
At 04:00 PM 4/20/00 -0400, you wrote:
All modems on all 12 cards are in this modem not available state.... sigh...
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Coffey Sent: Thursday, April 20, 2000 3:48 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) modem not available
Sometimes it helps to exchange two cards, reseating the offending one usually does not work. Pull two out and swap them. Occasionally, you have to power down the whole chassis to get the modem back. Had to do one that way today.
At 02:44 PM 4/20/00 -0400, you wrote:
I go in click on the modems adn do a reset. It works for me.
Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655
"Duct tape is like the force. It has a light side, a dark side, and holds the universe together."
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton Sent: Wednesday, April 19, 2000 5:02 PM To: Usr-Tc@Lists.Xmission.Com Subject: (usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get:
SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2)
Does anyone know how to make these "modems available"?
David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center Suite #100, Casper, WY 82601 www.vcn.com _________________________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (5)
-
Buzz Gould -
David Hamilton -
David Hamilton -
Greg Coffey -
Ted Mecimore