(usr-tc) DSP cards rebooting
Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards? This code is supposed to help with the modem pair problem. Although this problem has not been as noticeable as the past, I still have various modem problems and recently noticed DSP cards rebooting. I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not. Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc.
If your cards are hardware revision 0.55 or 0.54, try loading 2.0.51 on them... Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, & Shelbyville "It's a dog-eat-dog world, and I'm wearing Milk-Bone underwear." On Tue, 11 Jan 2000, Cheryl Johnson wrote:
Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards? This code is supposed to help with the modem pair problem. Although this problem has not been as noticeable as the past, I still have various modem problems and recently noticed DSP cards rebooting. I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not.
Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
The hardware revision on our DSP cards are 0.49. I specifically upgraded to this code because it was supposed to help with the pair modem issue. I may try the 2.0.51 in a test lab before implementing this for a while. Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc. ----- Original Message ----- From: Mike Andrews <mandrews@bit0.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, January 11, 2000 5:37 PM Subject: Re: (usr-tc) DSP cards rebooting
If your cards are hardware revision 0.55 or 0.54, try loading 2.0.51 on them...
Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, & Shelbyville "It's a dog-eat-dog world, and I'm wearing Milk-Bone underwear."
On Tue, 11 Jan 2000, Cheryl Johnson wrote:
Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards? This code is supposed to help with the modem pair problem. Although this problem has not been as noticeable as the past, I still have various modem problems and recently noticed DSP cards rebooting. I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not.
Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Just thought of this..is the 2.0.51 recommended for hardware revision 0.49 or just for 0.54 or 0.55? ' ----- Original Message ----- From: Mike Andrews <mandrews@bit0.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, January 11, 2000 5:37 PM Subject: Re: (usr-tc) DSP cards rebooting
If your cards are hardware revision 0.55 or 0.54, try loading 2.0.51 on them...
Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, & Shelbyville "It's a dog-eat-dog world, and I'm wearing Milk-Bone underwear."
On Tue, 11 Jan 2000, Cheryl Johnson wrote:
Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards? This code is supposed to help with the modem pair problem. Although this problem has not been as noticeable as the past, I still have various modem problems and recently noticed DSP cards rebooting. I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not.
Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I have had this problem on one or two occasions. The solution in my case was to power cycle the rack. Problem then went away. On 11 Jan 00, at 17:24, Cheryl Johnson wrote: From: "Cheryl Johnson" <netadmin@seidata.com> To: <usr-tc@lists.xmission.com> Subject: (usr-tc) DSP cards rebooting Date sent: Tue, 11 Jan 2000 17:24:34 -0500 Send reply to: usr-tc@lists.xmission.com Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards?This code is supposed to help withthe modem pair problem. Althoughthis problem has not been as noticeable as the past, I still havevarious modem problems and recently noticedDSP cards rebooting.I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not. Cheryl Johnson netadmin@seidata.com SEI Data Network Services, Inc. **************************************************************** * Fred Williams email fwilliams@gtnet.gov.uk * * CCTA voice 01603 704706 * * Rosebery Court GTN 3040 4706 * * St Andrews Business Park fax 01603 704817 * * NORWICH GTN fax 3040 4817 * * NR7 0HS UK * **************************************************************** - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Cheryl Johnson -
Fred Williams -
Mike Andrews