Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP. I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk. Any guidance appreciated Phillip ------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
What kind of routing are you doing on that box? What routing protocol are you using? Todd ----- Original Message ----- From: <pferraro@wna-linknet.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 15, 2003 10:47 AM Subject: [USR-TC] Routing a Subnet (.248)
Have an ISDN customer that wants 6 IPs in a subnet for his end. We are
using
TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP.
I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk.
Any guidance appreciated
Phillip
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
*This message was transferred with a trial version of CommuniGate(tm) Pro* If I'm not wrong (because of the sintax), you have to send an attribute called Framed-IP-Route. That attribute tells to the NAS to put a route of the subnet you need into its own routing table. I think you need to check radius attributes RFC. Regards.
Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP.
I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk.
Any guidance appreciated
Phillip
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
Since he's probably connecting with a ISDN router, they usually don't bridge between the LAN and WAN interfaces. We give them a single static IP x.x.x.x with a 255.255.255.255 subnet, then have an attribute for Framed-Route (or Framed-IP-Route depending on your radius dictionary) with a value of "xxx.xxx.88.192/29 x.x.x.x 1". This enters a route into the Hiperarc's routing table to send that subnet to the customer's static IP, where they can use it on their LAN. Mike Wilker Director of Network Operations Tiger Communications & Local Link ----- Original Message ----- From: <pferraro@wna-linknet.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 15, 2003 9:47 AM Subject: [USR-TC] Routing a Subnet (.248) Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP. I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk. Any guidance appreciated Phillip ------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access ------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
MIke, This waas also one of the options I was given, however I was told that the other way was preferred... I can put that back in, but I think he has a problem with NAT on the pipeline.... Thanks for the info Phillip Quoting Mike Wilker <mikew@ll.net>:
Since he's probably connecting with a ISDN router, they usually don't bridge between the LAN and WAN interfaces. We give them a single static IP x.x.x.x with a 255.255.255.255 subnet, then have an attribute for Framed-Route (or Framed-IP-Route depending on your radius dictionary) with a value of "xxx.xxx.88.192/29 x.x.x.x 1". This enters a route into the Hiperarc's routing table to send that subnet to the customer's static IP, where they can use it on their LAN.
Mike Wilker Director of Network Operations Tiger Communications & Local Link
----- Original Message ----- From: <pferraro@wna-linknet.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 15, 2003 9:47 AM Subject: [USR-TC] Routing a Subnet (.248)
Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP.
I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk.
Any guidance appreciated
Phillip
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -------------------------
This E-Mail Was Scanned
For Viruses by RAV@WorldNet Access
-------------------------
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
We have several ISDN customers using this scenario. The only extra thing we use is RIPv2 to redistribute the routes. If we ever have enough production equipment that supports OSPF we'll probably move to that, but RIP has been working well for our purposes. Aside from that, we use the same Framed-Address and Framed-Netmask in RADIUS for each user. Regards, Lee Terrell pferraro@wna-linknet.com wrote:
Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP.
I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk.
Any guidance appreciated
Phillip
participants (5)
-
Lee Terrell -
Mike Wilker -
pferraro@wna-linknet.com -
Sergio Gonzalez -
Todd Bertolozzi