I have an older NMC, the kind I worked with for many years, but have drawn a blank on what to try when it won't respond on the console port. All DIPs are down on it, isn't their one I can toggle to maybe clear it out? I do remember its possible to brick an older NMC, and possibly that is the case with this one. Also if someone remembers the feature enable string that shows v90, I am looking for that as well. Thanks for all the help, Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi Brian, Try turning dipswitch 5 to on then reconfig then turn it back off. should do the trick. Dave Lajoie Remote Access Administrator North Country Internet Access E-Mail: dave@ncia.net P.S. I'll try to send a clip from the database _off list_ On Wed, 7 Feb 2001, Brian wrote:
I have an older NMC, the kind I worked with for many years, but have drawn a blank on what to try when it won't respond on the console port. All DIPs are down on it, isn't their one I can toggle to maybe clear it out?
I do remember its possible to brick an older NMC, and possibly that is the case with this one.
Also if someone remembers the feature enable string that shows v90, I am looking for that as well.
Thanks for all the help,
Brian
----------------------------------------------- I'm buying used CISCO gear!! email me for a quote
Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, If you need a pre-flashed flash chip for this, let me know, I've got a ton of old flash chips (4M). I can pre-load something that fits on there. I think this would un-paperweight it, but it's been a while... Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork@inch.com | access@inch.com On Wed, 7 Feb 2001, Brian wrote:
I have an older NMC, the kind I worked with for many years, but have drawn a blank on what to try when it won't respond on the console port. All DIPs are down on it, isn't their one I can toggle to maybe clear it out?
I do remember its possible to brick an older NMC, and possibly that is the case with this one.
Also if someone remembers the feature enable string that shows v90, I am looking for that as well.
Thanks for all the help,
Brian
----------------------------------------------- I'm buying used CISCO gear!! email me for a quote
Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Brian -
Charles Sprickman -
Dave Lajoie