Re: (usr-tc) Disconnect reasons
Greg, See the Hiper Network Management Card SNMP and MIB Reference (# 1.024.1661-00), available on http://totalservice.3com.com. Chapter 24: Modem Disconnect and Fail to Connect Reason Reference is what you'll be interested in. STeve Valiunas "Greg owens" <gowens@magnolia-net.com> on 01/11/2000 07:35:08 PM Please respond to usr-tc@lists.xmission.com Sent by: "Greg owens" <gowens@magnolia-net.com> To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Disconnect reasons Looking at the Total Control It will list several types of disconnect reasons.....rcvdGatewayDiscCmd, NormalUserCallClear,v42DisconnectCm, along with several others...Where can I find a explanation of these reasons. Which ones other than CarrierLoss should alert me to problems other than the users just logged off. Thanks Greg Owens Magnolia Internet Services http://www.magnolia-net.com
Would like to hear from anyone who has been running this code for a few weeks... We are looking to upgrade our hubs, but want to make sure there are no inherent problems with moving to this code combination. We are currently running 4.1.59-6 and DSP 2.0.81 without any problems. We also have 2 hubs that have quads running the latest TC3.6 suite and HiperArcs Also want to make sure there are no problems moving the HiperArcs in those chassis to 4.1.22 Any and all comments welcome! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
pferraro@wna-linknet.com wrote:
Would like to hear from anyone who has been running this code for a few weeks... We are looking to upgrade our hubs, but want to make sure there are no inherent problems with moving to this code combination. We are currently running 4.1.59-6 and DSP 2.0.81 without any problems.
I went to upgrade one ARC to 4.1.22 from 4.1.59-6 and ran into problems with routes added by netmgr not being broadcast out with RIP. After dicking with it for a couple hours I gave up. I am running 2.0.51 without a problem on the DSPs. BTW: Why the hell is poison reverse and split horizon both turned on by default? Doesn't poison reverse defeat split horizon? -Ron GLISnet, Inc. +1 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
pferraro@wna-linknet.com -
Ronald Kushner -
Steve Valiunas