Hi: This is really great help. You see I have two boxes; one with all HiPer cards and the other with all HiPer except NMC. So I will get to practice both. Before I start, like to Flash the cards with the latest software under TC 4.5. I have seen some posting, where some of the technicians have experienced problem with the latest versions of software for HiPer NMC, HiPer ARC & HiPer DSP. I will appreciate if I get suggestions as to which are the latest stable software versions? I have also seen some posting where it was suggested to apply some patches? Thank you. Kirt -----Original Message----- From: ISN Support Staff [mailto:support@isn.net] Sent: Saturday, August 23, 2003 10:41 PM To: Discussion "relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] TC? Hi Kirti, I'm not an expert in working with TC, but I think I can help you out. First you need to configure the NMC to give it an IP address, which you do through the console connection on the back. Once you've done that, you can use the TCM software (Total Control Manager) to configure the rest of the chassis from a Windows box. As long as your whole chassis is HiPer (including the NMC) you should be fine. If you, like me, are in the unfortunate situation of having Hiper DSP and ARC cards, but a regular NMC, you're in for a bit of a rough ride, as in that case you do seem to have to use the console interface of the HiperArc to configure the DSP mappings. You can still configure the rest of the features via TCM though. On Sat, 2003-08-23 at 23:05, Kirti S. Bajwa wrote:

This is my first stab at 3Com TC product and I have million questions. So I ask the first one:

I have read and re-read quite a few documents on TC. My understanding was that I could configure all the cards in a TC Chassis (HiPer NMC, HiPer ARC, HiPer DSP, Quad, etc) from one place namely Network Management Card (NMC) software. As I spend the entire week reading, it does not seem that way and that each card in the TC chassis has to be configured individually.

Can somebody clarify this for me? Thanks.

Kirt Bajwa TIB Computer Systems Mountain City, TN 37683

Tel: (423) 727-3001

eMail: kbajwa@tib.com

______________________________________________________________________ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc