I don't think rebooting is necessary. blake
-----Original Message----- From: Tom Swenson [mailto:tom@netconx.net] Sent: Wednesday, April 19, 2000 2:59 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Suggested Firmware
Do I need to reset my DSP after changing this? I'm still fairly new to USR's. I found the setting, mine was at 7 by default. I don't always know what changes are instantaneous and which ones need rebooting for.
Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX
*********** REPLY SEPARATOR ***********
On 4/17/2000 at 2:58 PM Blake Fithen wrote:
Don't forget to set the "Carrier Loss Detect Delay" to around 20 or so. That helped us quite a bit on the disconnects/failed handshakes.
blake
-----Original Message----- From: Mark S - Squid Manager [mailto:squid@greenapple.com] Sent: Monday, April 17, 2000 2:37 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Suggested Firmware
It works, but we have noticed higher disconnects and failed handshakes with these two.......2.0.51 and 0.53 and above works great........
Mark
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Monday, April 17, 2000 1:52 PM Subject: Re: (usr-tc) Suggested Firmware
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote:
No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware?
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
It didn't appear to be, but I never really have known. As I'm going thru my dsp's and changing settings, it appears after I hit set, then if I hit get, the new value comes back. Thanks for responding. Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX *********** REPLY SEPARATOR *********** On 4/19/2000 at 3:07 PM Blake Fithen wrote:
I don't think rebooting is necessary.
blake
-----Original Message----- From: Tom Swenson [mailto:tom@netconx.net] Sent: Wednesday, April 19, 2000 2:59 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Suggested Firmware
Do I need to reset my DSP after changing this? I'm still fairly new to USR's. I found the setting, mine was at 7 by default. I don't always know what changes are instantaneous and which ones need rebooting for.
Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX
*********** REPLY SEPARATOR ***********
On 4/17/2000 at 2:58 PM Blake Fithen wrote:
Don't forget to set the "Carrier Loss Detect Delay" to around 20 or so. That helped us quite a bit on the disconnects/failed handshakes.
blake
-----Original Message----- From: Mark S - Squid Manager [mailto:squid@greenapple.com] Sent: Monday, April 17, 2000 2:37 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Suggested Firmware
It works, but we have noticed higher disconnects and failed handshakes with these two.......2.0.51 and 0.53 and above works great........
Mark
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Monday, April 17, 2000 1:52 PM Subject: Re: (usr-tc) Suggested Firmware
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote:
No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware?
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Blake Fithen -
Tom Swenson