Are you resetting both sides or just the NAK (front)? Consistent span problems would indicate a problem with the span/Cat5/NIC. Are these PRI, ChT1, or E1/R2? What kind of problems do they have? Abnormal LEDs or Line/Code Violations? -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Geoffrey Deasey Sent: Wednesday, February 16, 2005 9:17 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] 3COM settings What version of code is recommended on a chassis with: 2 70A power supplys 1 HyperArc 7 HyperDSP 1 NMC (some have HyperNMC;s) Every day a different pri has errors, the only thing that seems to clear it is to pop the card out and re-insert. Thanks Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc