Re: (usr-tc) X2 Key still necessary
You need only add the X2 key to a chassis once. Any quad modem code upgrdes after that will then use the same key. Steve Ralph Helfenberger <r.helfenberger@comlight.ch> on 12/07/99 04:38:45 AM Please respond to usr-tc@lists.xmission.com Sent by: Ralph Helfenberger <r.helfenberger@comlight.ch> To: TotalControl Mailing List <usr-tc@lists.xmission.com> cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) X2 Key still necessary Hi everybody I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. When I did this last year I had to buy a X2 enable key. This product is no longer available. So the question I have: Is this key still necessary? Or do I just upgrade the Quadmodems to the latest code and then I have V.90 automatically enabled? Ralph -- ========================================================================== R. Helfenberger Internet r.helfenberger@comlight.ch Comlight AG Tel +41 31 740 40 40 Industriestr. 17 Fax +41 31 740 40 90 3178 Boesingen Switzerland www.comlight.ch ========================================================================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Is it possible to lose that enable key in the flashing process? If I am installing a v90 NMC to a chassis that had not been running v90 standard, Is the card all I need to install. Some people have mentioned that you have to match the code on the modems. Is that true? Can anyone suggest a stable, v90 compatible sequence for the modems (Quad Digitals) and the NMC v90? At 07:34 AM 12/07/1999 -0600, you wrote:
You need only add the X2 key to a chassis once. Any quad modem code upgrdes after that will then use the same key.
Steve
Ralph Helfenberger <r.helfenberger@comlight.ch> on 12/07/99 04:38:45 AM
Please respond to usr-tc@lists.xmission.com
Sent by: Ralph Helfenberger <r.helfenberger@comlight.ch>
To: TotalControl Mailing List <usr-tc@lists.xmission.com> cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) X2 Key still necessary
Hi everybody I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. When I did this last year I had to buy a X2 enable key. This product is no longer available. So the question I have: Is this key still necessary? Or do I just upgrade the Quadmodems to the latest code and then I have V.90 automatically enabled?
Ralph
-- ========================================================================== R. Helfenberger Internet r.helfenberger@comlight.ch Comlight AG Tel +41 31 740 40 40 Industriestr. 17 Fax +41 31 740 40 90 3178 Boesingen Switzerland www.comlight.ch ==========================================================================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Steve Rivera -
Steve Valiunas