(usr-tc) Whats a good way to get rid of old Quad equipment
I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCsYou can get close to $1250 on ebay sometimes. I hear these days its abit lower, but they sell. Does anyone think that 3Com will ever do the Trade-In Promotion again? 24 cards for a DSP concept. -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Tom Schmidt Sent: Wednesday, May 02, 2001 1:15 PM To: 'usr-tc@lists.xmission.com' Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCs3com just increased their trade-in on them to anywhere between $40 and $90 depending on what you buy to replace them, i.e. hyper or the new multispan cards. If you are just looking to get rid of them, try the isp-equipment list http://isp-lists.isp-planet.com/isp-equipment/ Mark Green Apple Inc ----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 1:14 PM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
I am in Africa and had a total control that got blown up. May be it could be nice you offer your modems to us as A GIFT OF THE YEAR 2001 to help develop Africa. Thanks, Valantine Tom Schmidt wrote:
I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCsCommWorks just announced a trade in program to trade up quads to the HyperDSPs. Seth ----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCsReally? It's a little late for April fools.... -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Seth Jacobs Sent: Wednesday, May 02, 2001 11:25 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Whats a good way to get rid of old Quad equipment CommWorks just announced a trade in program to trade up quads to the HyperDSPs. Seth ----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCsSpoke too soon. http://www.commworks.com/svprovider/programs/v92_tradeup/ Randy -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Randy Cosby Sent: Wednesday, May 02, 2001 11:48 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Whats a good way to get rid of old Quad equipment Really? It's a little late for April fools.... -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Seth Jacobs Sent: Wednesday, May 02, 2001 11:25 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Whats a good way to get rid of old Quad equipment CommWorks just announced a trade in program to trade up quads to the HyperDSPs. Seth ----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
My guess is this is their response to the "no v.90 on Quads" thread. This is much better than the trade-in program they were just running until the end of April. That one got you $25/port ($100 per Quad card). This one is at least twice as good. Which sucks for me since I just traded in my Quads on the older program, and now I'll only get $1200 instead of $2400 back. Damn. :) Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.) On Wed, 2 May 2001, Randy Cosby wrote:
RE: (usr-tc) Frozen NMCsSpoke too soon. http://www.commworks.com/svprovider/programs/v92_tradeup/
Randy
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Randy Cosby Sent: Wednesday, May 02, 2001 11:48 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Whats a good way to get rid of old Quad equipment
Really? It's a little late for April fools....
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Seth Jacobs Sent: Wednesday, May 02, 2001 11:25 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Whats a good way to get rid of old Quad equipment
CommWorks just announced a trade in program to trade up quads to the HyperDSPs.
Seth
----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment
I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
What date did you purchase? Even though we are just hearing about this, the rebate period for new purchases started March 1st. On 3 May 2001, at 11:30, Mike Andrews wrote:
My guess is this is their response to the "no v.90 on Quads" thread.
This is much better than the trade-in program they were just running until the end of April. That one got you $25/port ($100 per Quad card).
This one is at least twice as good.
Which sucks for me since I just traded in my Quads on the older program, and now I'll only get $1200 instead of $2400 back. Damn. :)
Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.)
On Wed, 2 May 2001, Randy Cosby wrote:
RE: (usr-tc) Frozen NMCsSpoke too soon. http://www.commworks.com/svprovider/programs/v92_tradeup/
Randy
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Randy Cosby Sent: Wednesday, May 02, 2001 11:48 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Whats a good way to get rid of old Quad equipment
Really? It's a little late for April fools....
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Seth Jacobs Sent: Wednesday, May 02, 2001 11:25 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Whats a good way to get rid of old Quad equipment
CommWorks just announced a trade in program to trade up quads to the HyperDSPs.
Seth
----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment
I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Wayne Barber Coastal Telco Services - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Right after March 1, but it's too late because I already shipped all 12 of my Quad cards back... Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.) On Thu, 3 May 2001, Wayne Barber wrote:
What date did you purchase? Even though we are just hearing about this, the rebate period for new purchases started March 1st.
On 3 May 2001, at 11:30, Mike Andrews wrote:
My guess is this is their response to the "no v.90 on Quads" thread.
This is much better than the trade-in program they were just running until the end of April. That one got you $25/port ($100 per Quad card).
This one is at least twice as good.
Which sucks for me since I just traded in my Quads on the older program, and now I'll only get $1200 instead of $2400 back. Damn. :)
Mike Andrews * mandrews@dcr.net * mandrews@bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.)
On Wed, 2 May 2001, Randy Cosby wrote:
RE: (usr-tc) Frozen NMCsSpoke too soon. http://www.commworks.com/svprovider/programs/v92_tradeup/
Randy
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Randy Cosby Sent: Wednesday, May 02, 2001 11:48 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Whats a good way to get rid of old Quad equipment
Really? It's a little late for April fools....
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Seth Jacobs Sent: Wednesday, May 02, 2001 11:25 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Whats a good way to get rid of old Quad equipment
CommWorks just announced a trade in program to trade up quads to the HyperDSPs.
Seth
----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 10:14 AM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment
I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Wayne Barber Coastal Telco Services
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
RE: (usr-tc) Frozen NMCsMake sure .htaccess is allowed in the secure section of the http.conf file. Is htaccess working in the non-secure part? Also make sure there is not another .htaccess below this one that is "overwriting" it. Mark Green Apple Inc ----- Original Message ----- From: Tom Schmidt To: 'usr-tc@lists.xmission.com' Sent: Wednesday, May 02, 2001 1:14 PM Subject: (usr-tc) Whats a good way to get rid of old Quad equipment I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?
RE: (usr-tc) Frozen NMCsHI all, I just want to know whether NMC can do routing?. As I have received a chasis from my parent company in which there is 1 Dual PRI card, 15 Quad modem cards and NMC in 17th slot. I have been using Netserver PRI card in my 20 other chasis. But this time I didn't receive any Netserver card. So is it possible to do routing without Netserver Card? Nauman.
RE: (usr-tc) Frozen NMCsSorry nope NMC is NETWORK MANAGEMENT CARD, It works with the chassis, to be able to do diagnositic checks, Flashing of modem cards and so on. But as for routing , nothing is going to happen there. Also the NETSERVER card also does the handleling of the ISDN calls, at least the routing to the modem part. Andrew -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Nauman Malik Sent: Thursday, May 03, 2001 5:05 AM To: usr-tc@lists.xmission.com Subject: (usr-tc) without Netserver HI all, I just want to know whether NMC can do routing?. As I have received a chasis from my parent company in which there is 1 Dual PRI card, 15 Quad modem cards and NMC in 17th slot. I have been using Netserver PRI card in my 20 other chasis. But this time I didn't receive any Netserver card. So is it possible to do routing without Netserver Card? Nauman.
Also sprach Nauman Malik
RE: (usr-tc) Frozen NMCsHI all,
I just want to know whether NMC can do routing?. As I have received a chasis from my parent company in which there is 1 Dual PRI card, 15 Quad modem cards and NMC in 17th slot. I have been using Netserver PRI card in my 20 other chasis. But this time I didn't receive any Netserver card. So is it possible to do routing without Netserver Card?
Actually, it can to some degree, but not what it sounds like you need. The NMC card actually can route between the wan ports and ethernet port on the NMC NIC card, at least minimal routing, though I don't know anyone who has ever taken advantage of that. It definitely will not be able to handle the routing of data to and from modems or see the modems as interfaces or anything, so you're SOL in that area which is what it sounds like you need. :) -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (11)
-
Andrew (NetFlash System Administrator) -
Green Apple Squid Manager -
ISP-NetworkHardware.com -
Jeff Mcadams -
Mike Andrews -
Nauman Malik -
Randy Cosby -
Seth Jacobs -
Tom Schmidt -
Valantine -
Wayne Barber