no, we don't have any firewall in our network. ----- Original Message ----- From: Craig Gittens To: usr-tc@mailman.xmission.com Sent: Tuesday, December 10, 2002 4:31 PM Subject: RE: [USR-TC] tcm doesn't find nmc Firewall blocking SNMP? Craig. -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of shahrooz Sent: Tuesday, December 10, 2002 8:06 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] tcm doesn't find nmc Hi all I want to connect to nmc with tcm (windows) but tcm reports: "device not responding" snmp strings are correct and nmc ip ping in lan with no problem. any suggestion? Regards Shahrooz

Hello, I experienced something wierd today. We have one PRI circuit that shows a LPBK/D-Alarm when viewing in TCM. When actually physically looking at the card, it is NOT alarmed out, and has anywhere from 10-23 people connected to it. I have tried restore, Hardware reset, software reset, and physically reseating the NAC with no change. The card is actually taking calls fine, and holding them, just shows incorrectly in TCM. Any Ideas anyone, we had some other phone circuit issues the past 2 days so I haven't replaced the card with another yet. Thanks, Wm. Roche Information Boulevard Internet Services, Inc. http://www.infoblvd.net ----- Original Message ----- From: "Stephen Rivera - WRCA.Net" <steverivera@wrca.net> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, December 10, 2002 11:01 AM Subject: Re: [USR-TC] tcm doesn't find nmc

Can you ping it? If not I had a similar incident yesterday. Through the console port verify that the ethernet is enabled. I think its number 5 or 6 on the console menu.

Hope that helps.

At 03:35 PM 12/10/2002 +0330, you wrote:

...

Hi all I want to connect to nmc with tcm (windows) but tcm reports: "device not responding" snmp strings are correct and nmc ip ping in lan with no problem. any suggestion? Regards Shahrooz

Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

This is pretty useless info. But Steve you need to fix your sig :) "for more product info got www.wrca.net" Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =========================================== web : www.cmsinter.net email: tim@cmsinter.net phone: 989.235.5100 x222 fax : 989.235.5151 -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Stephen Rivera - WRCA.Net Sent: Tuesday, December 10, 2002 11:01 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] tcm doesn't find nmc Can you ping it? If not I had a similar incident yesterday. Through the console port verify that the ethernet is enabled. I think its number 5 or 6 on the console menu. Hope that helps. At 03:35 PM 12/10/2002 +0330, you wrote:

Hi all I want to connect to nmc with tcm (windows) but tcm reports: "device not responding" snmp strings are correct and nmc ip ping in lan with no problem. any suggestion? Regards Shahrooz

Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc