*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello there. I got a little problem. I'm hopping you can help me. A few days ago I installed a new Hiper DSP where other 3 DSPs were working in conjuction with a Dual E1/PRI card and some quad modems cards. Well, after insert the new DSP in the chassis and move the Dual E1 one slot to the right, the 4 DSP are working well, but the Dual E1 seased functions!!! .. There was no reconfiguration over the Dual E1, and it was working as well as it cans before the instalation of the new DSP. These were the cards positions before the instalation of the new DSP (all worked well) slot 1 -> Hiper DSP (30 Chan) slot 2 -> Hiper DSP (30 Chan) slot 3 -> Hiper DSP (30 Chan) slot 4 -> Dual E1/PRI slot[5-9] -> Empty slot10 -> Quad Modem Digital slot11 -> Quad Modem Digital slot12 -> Quad Modem Digital slot13 -> Quad Modem Digital slot14 -> Quad Modem Digital slot15 -> Quad Modem Digital slot16 -> Hiper ARC slot17 -> NMC and these are the positions AFTER the installation (only DSP work!!) slot 1 -> Hiper DSP (30 Chan) slot 2 -> Hiper DSP (30 Chan) slot 3 -> Hiper DSP (30 Chan) slot 4 -> Dual E1/PRI slot 5 -> Hiper DSP (30 Chan) slot[6-9] -> Empty slot10 -> Quad Modem Digital slot11 -> Quad Modem Digital slot12 -> Quad Modem Digital slot13 -> Quad Modem Digital slot14 -> Quad Modem Digital slot15 -> Quad Modem Digital slot16 -> Hiper ARC slot17 -> NMC What should be happening? Thanks in advance for the help. /Sergio Sergio Gonzalez Director Operativo -- Operative Manager Skynet de Colombia S.A. Santafé de Bogotá, Colombia, South America. 57(+1) 6 422 020 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.