Hello List: I am setting HiPer ARC and need help in setting up dns host. Here is better explanation: I have the following servers: fw.tibinternet.net 12.21.237.9 ns1.tibinternet.net 12.21.237.10 ns2.tibinternet.net 12.21.237.11 rdx.tibinternet.net 12.21.237.12 mail.tibinternet.net 12.21.237.13 data.tibinternet.net 12.21.237.14 I am using djbDNS software for my DNS application. (if you are not familiar with djbDNS, please see http://cr.yp.to/djbdns.html). In djbDNS, DNS Cache server is called 'dnscache' and runs on a server and listens to DNS queries on a dedicated IP address. My DNS server settings are as follows: ns1.tibinternet.net (first dns server) listens on eth0:1 12.21.237.20 ns2.tibinternet.net (second dns server) listens on eth0:1 12.21.237.21 My questions is; when I 'add dns host' on HiPer ARC, which IP address should I use? Is it the IP address of the server (12.21.237.10/11) or IP address on which DNS server (dnscache) listens on (12.21.237.20/21)? Thank you in advance. Kirti
To be honest I'm not real sure what the difference between add dns host and add dns server is. Based on what you've said this is what I would do: add dns server 12.21.237.20 preference 1 name "ns1.tibinternet.net" add dns server 12.21.237.21 preference 2 name "ns2.tibinternet.net" set dns domain_name tibinternet.net save all To verify what the above did on your hiperarc try these: list dns servers show dns settings resolve name www.google.com Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, January 26, 2005 2:48 PM Subject: RE: [USR-TC] add DNS host
Hello List:
I am setting HiPer ARC and need help in setting up dns host. Here is better explanation:
I have the following servers:
fw.tibinternet.net 12.21.237.9 ns1.tibinternet.net 12.21.237.10 ns2.tibinternet.net 12.21.237.11 rdx.tibinternet.net 12.21.237.12 mail.tibinternet.net 12.21.237.13 data.tibinternet.net 12.21.237.14
I am using djbDNS software for my DNS application. (if you are not familiar with djbDNS, please see http://cr.yp.to/djbdns.html). In djbDNS, DNS Cache server is called 'dnscache' and runs on a server and listens to DNS queries on a dedicated IP address. My DNS server settings are as follows:
ns1.tibinternet.net (first dns server) listens on eth0:1 12.21.237.20 ns2.tibinternet.net (second dns server) listens on eth0:1 12.21.237.21
My questions is; when I 'add dns host' on HiPer ARC, which IP address should I use?
Is it the IP address of the server (12.21.237.10/11) or IP address on which DNS server (dnscache) listens on (12.21.237.20/21)?
Thank you in advance.
Kirti
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Looking at this again I'm confused on what the ip of your dns servers are. You're going to want to use the "correct" ip which is something below: ns1.tibinternet.net 12.21.237.10 ns2.tibinternet.net 12.21.237.11 ns1.tibinternet.net (first dns server) listens on eth0:1 12.21.237.20 ns2.tibinternet.net (second dns server) listens on eth0:1 12.21.237.21 I don't get any of them to resolve nor ping. Todd ----- Original Message ----- From: "Todd Bertolozzi" <berto@core.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Wednesday, January 26, 2005 3:07 PM Subject: Re: [USR-TC] add DNS host
To be honest I'm not real sure what the difference between add dns host and add dns server is. Based on what you've said this is what I would do:
add dns server 12.21.237.20 preference 1 name "ns1.tibinternet.net" add dns server 12.21.237.21 preference 2 name "ns2.tibinternet.net" set dns domain_name tibinternet.net save all
To verify what the above did on your hiperarc try these:
list dns servers show dns settings resolve name www.google.com
Todd
----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, January 26, 2005 2:48 PM Subject: RE: [USR-TC] add DNS host
Hello List:
I am setting HiPer ARC and need help in setting up dns host. Here is better explanation:
I have the following servers:
fw.tibinternet.net 12.21.237.9 ns1.tibinternet.net 12.21.237.10 ns2.tibinternet.net 12.21.237.11 rdx.tibinternet.net 12.21.237.12 mail.tibinternet.net 12.21.237.13 data.tibinternet.net 12.21.237.14
I am using djbDNS software for my DNS application. (if you are not familiar with djbDNS, please see http://cr.yp.to/djbdns.html). In djbDNS, DNS Cache server is called 'dnscache' and runs on a server and listens to DNS queries on a dedicated IP address. My DNS server settings are as follows:
ns1.tibinternet.net (first dns server) listens on eth0:1 12.21.237.20 ns2.tibinternet.net (second dns server) listens on eth0:1 12.21.237.21
My questions is; when I 'add dns host' on HiPer ARC, which IP address should I use?
Is it the IP address of the server (12.21.237.10/11) or IP address on which DNS server (dnscache) listens on (12.21.237.20/21)?
Thank you in advance.
Kirti
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (2)
-
Kirti S. Bajwa -
Todd Bertolozzi