i use freeradius with a new (!) tc but when i assign Framed-IP-Address = 195.167.230.23 without + hiper say to me that this adress overlap! (if i put + after .. it work but the adresse is not static!) does anyone have an idea to do this? Lionel Drevon ldrevon@adeli.fr Adeli http://www.adeli.fr 618 Av. Gal de Gaulle Tel 04 78 66 11 85 69760 Limonest Fax 04 78 66 04 33
the soluce is : don't put an ip netmask for doing static assignement! Le 24 May 2003 à 11:19, usr-tc@adeli.fr a écrit:
i use freeradius with a new (!) tc but when i assign Framed-IP-Address = 195.167.230.23 without + hiper say to me that this adress overlap! (if i put + after .. it work but the adresse is not static!)
does anyone have an idea to do this?
Lionel Drevon ldrevon@adeli.fr Adeli http://www.adeli.fr 618 Av. Gal de Gaulle Tel 04 78 66 11 85 69760 Limonest Fax 04 78 66 04 33
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Lionel Drevon ldrevon@adeli.fr Adeli http://www.adeli.fr 618 Av. Gal de Gaulle Tel 04 78 66 11 85 69760 Limonest Fax 04 78 66 04 33
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one. This is more or less what I've (fake IPs because of the example): Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240 all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP. As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240 When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message: ERROR - Specified gateway is not on a directly connected network. What am I doing wrong? Thanks in advance for the help. Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly. You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network. Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly.
The HARCs has as a default route : 192.168.1.2 and I want to change it for 192.168.1.1 They belong to the same sub network. I already tried to add the new one without deleting the old default route, but it said the same error. any ideas?.
You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
Is the new gateway (.1) up and pingable? If it's not alive I'm thinking you'll get that error message. What is the command exactly as your are typing it in? Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 1:41 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly.
The HARCs has as a default route : 192.168.1.2
and I want to change it for 192.168.1.1
They belong to the same sub network.
I already tried to add the new one without deleting the old default route, but it said the same error.
any ideas?.
You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Is the new gateway (.1) up and pingable? If it's not alive I'm thinking you'll get that error message. What is the command exactly as your are typing it in?
Yeap. The .1 router is pingable and up. the command is add ip defaultroute gateway 192.168.1.1 metric 1
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 1:41 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly.
The HARCs has as a default route : 192.168.1.2
and I want to change it for 192.168.1.1
They belong to the same sub network.
I already tried to add the new one without deleting the old default route, but it said the same error.
any ideas?.
You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
You got me man....might want to try setting up some of the facilities to see some more debug info. Unless your ethernet address are out of the subnet I don't understand why it wouldn't work. Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 3:35 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Is the new gateway (.1) up and pingable? If it's not alive I'm thinking you'll get that error message. What is the command exactly as your are typing it in?
Yeap. The .1 router is pingable and up. the command is
add ip defaultroute gateway 192.168.1.1 metric 1
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 1:41 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly.
The HARCs has as a default route : 192.168.1.2
and I want to change it for 192.168.1.1
They belong to the same sub network.
I already tried to add the new one without deleting the old default route, but it said the same error.
any ideas?.
You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Also....the .1 can't just be pingable....it needs to be the next hop from these arcs. Meaning.....whatever router the .1 is on needs to be plugged into the same hub/switch as the arc's you are trying to renumber. Todd ----- Original Message ----- From: "Todd Bertolozzi" <berto@voyager.net> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 3:42 PM Subject: Re: [USR-TC] Problem with defaultroute
You got me man....might want to try setting up some of the facilities to see some more debug info. Unless your ethernet address are out of the subnet I don't understand why it wouldn't work.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 3:35 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Is the new gateway (.1) up and pingable? If it's not alive I'm thinking you'll get that error message. What is the command exactly as your are typing it in?
Yeap. The .1 router is pingable and up. the command is
add ip defaultroute gateway 192.168.1.1 metric 1
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 1:41 PM Subject: Re: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Add the new default route before deleting the old one. What is the new default route you are adding? If it is not in the same network as the ether address currently on the arc's it would spit back that error if I'm thinking correctly.
The HARCs has as a default route : 192.168.1.2
and I want to change it for 192.168.1.1
They belong to the same sub network.
I already tried to add the new one without deleting the old default route, but it said the same error.
any ideas?.
You'll have 2 setup in the arc...the old one will stay active until you change the ether address/mask to be on the same network.
Todd ----- Original Message ----- From: "Sergio Gonzalez" <sagonzal@sky.net.co> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, May 27, 2003 12:15 PM Subject: [USR-TC] Problem with defaultroute
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello
I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one.
This is more or less what I've (fake IPs because of the example):
Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240
all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP.
As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240
When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message:
ERROR - Specified gateway is not on a directly connected network.
What am I doing wrong?
Thanks in advance for the help.
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
Sergio Gonzalez -
Todd Bertolozzi -
usr-tc＠adeli.fr