(usr-tc) HiPer DSP MultiSpan cards
Had anyone out there purchased the new HiPer DSP MultiSpan cards? I'm at the point where I'm going to have to buy new hardware and the $3k savings over HiPer DSPs is attractive. Are the modems at least as good or better than HiPer DSPs? I did not anticipate purchasing more hardware due to churn and other options, but the way things are going I'm going to need to purchase more ports, so I haven't kept up with what's what. In the last three months I've watch our usage grow at an alarming rate. Purchasing a HiPer DSP bundle doesn't seem to make any sense at the way things are going. I have a chassis that running year old ARC and DSP code, any problems there too? I do have 128MB ARCs. -Ron GLISnet, Inc. 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Ron, Out of curiosity are you planning on putting this in a 1000 Chassis? Is this the 96 port card? Thanks Alan At 11:36 PM 2/7/2001 -0500, you wrote:
Had anyone out there purchased the new HiPer DSP MultiSpan cards?
I'm at the point where I'm going to have to buy new hardware and the $3k
savings
over HiPer DSPs is attractive. Are the modems at least as good or better than HiPer DSPs?
I did not anticipate purchasing more hardware due to churn and other options, but the way things are going I'm going to need to purchase more ports, so I haven't kept up with what's what. In the last three months I've watch our usage grow at an alarming rate. Purchasing a HiPer DSP bundle doesn't seem to make any sense at the way things are going.
I have a chassis that running year old ARC and DSP code, any problems there too? I do have 128MB ARCs.
-Ron GLISnet, Inc. 810/939.9885
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Alan Martin wrote:
Ron,
Out of curiosity are you planning on putting this in a 1000 Chassis? Is this the 96 port card?
Yes, I'm putting it into a two year old chassis. It's the four PRI card. I am under the impression they have a new HiPer ARC router with a faster processor and 256MB of RAM, but my older ARCs will work according to the salespeople I've talked to. I'm just wondering if anyone else on the list has purchased these cards? I'd love to fill the few remaining slots I have in a 130A chassis with higher density cards. -Ron GLISnet, Inc 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, Is there any way to allocate a different IP pool to an specific card in a chassis? HARC 4.1.59. - Marcelo - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Alan Martin -
Marcelo Souza -
Ronald Kushner