(usr-tc) command to busy out modem ports
I've asked for the command before but I can seem to find the response. Anyway slot:15/mod:20 and slot:15/mod:19 aren't anwering. They give either a busy signal or no answer. I've tried to reset them but that doesn't seem to help. Could someone again share with me the command for disabling these two ports so that calls simply roll over to the next available port? Is there a real fix for this problem? Thanks- Brian slot:15/mod:6 rjs3 DIALIN PPP 03-DEC-2000 22:05:17 slot:15/mod:7 khudson DIALIN PPP 03-DEC-2000 21:39:28 slot:15/mod:8 brianb DIALIN PPP 03-DEC-2000 22:06:19 slot:15/mod:9 motorctykid DIALIN PPP 03-DEC-2000 21:38:58 slot:15/mod:10 salatega DIALIN PPP 03-DEC-2000 21:38:51 slot:15/mod:11 jprice DIALIN PPP 03-DEC-2000 21:47:09 slot:15/mod:12 azred DIALIN PPP 03-DEC-2000 22:02:38 slot:15/mod:13 kcrust DIALIN PPP 03-DEC-2000 21:38:05 slot:15/mod:14 jaeen DIALIN PPP 03-DEC-2000 21:38:39 slot:15/mod:15 baseballfans DIALIN PPP 03-DEC-2000 21:49:08 slot:15/mod:16 heartsfire DIALIN PPP 03-DEC-2000 21:35:39 slot:15/mod:17 tawz DIALIN PPP 03-DEC-2000 22:12:47 slot:15/mod:18 mn64827 DIALIN PPP 03-DEC-2000 21:35:35 slot:15/mod:21 amari DIALIN PPP 03-DEC-2000 21:35:25 slot:15/mod:22 dsrtmoon DIALIN PPP 03-DEC-2000 21:46:50 slot:15/mod:23 kenkenco DIALIN PPP 03-DEC-2000 22:04:22 slot:15/mod:24 cullings DIALIN PPP 03-DEC-2000 21:35:19 HiPer>> - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Quoting Brian Burgmeier <brian@ntwrld.com>:
I've asked for the command before but I can seem to find the response. Anyway slot:15/mod:20 and slot:15/mod:19 aren't anwering. They give either a busy signal or no answer. I've tried to reset them but that doesn't seem to help. Could someone again share with me the command for disabling these two ports so that calls simply roll over to the next available port? Is there a real fix for this problem? Thanks- Brian
What version of code are you using on the HiPer arc and the HiPer DSP? V
slot:15/mod:6 rjs3 DIALIN PPP 03-DEC-2000 22:05:17 slot:15/mod:7 khudson DIALIN PPP 03-DEC-2000 21:39:28 slot:15/mod:8 brianb DIALIN PPP 03-DEC-2000 22:06:19 slot:15/mod:9 motorctykid DIALIN PPP 03-DEC-2000 21:38:58 slot:15/mod:10 salatega DIALIN PPP 03-DEC-2000 21:38:51 slot:15/mod:11 jprice DIALIN PPP 03-DEC-2000 21:47:09 slot:15/mod:12 azred DIALIN PPP 03-DEC-2000 22:02:38 slot:15/mod:13 kcrust DIALIN PPP 03-DEC-2000 21:38:05 slot:15/mod:14 jaeen DIALIN PPP 03-DEC-2000 21:38:39 slot:15/mod:15 baseballfans DIALIN PPP 03-DEC-2000 21:49:08 slot:15/mod:16 heartsfire DIALIN PPP 03-DEC-2000 21:35:39 slot:15/mod:17 tawz DIALIN PPP 03-DEC-2000 22:12:47 slot:15/mod:18 mn64827 DIALIN PPP 03-DEC-2000 21:35:35 slot:15/mod:21 amari DIALIN PPP 03-DEC-2000 21:35:25 slot:15/mod:22 dsrtmoon DIALIN PPP 03-DEC-2000 21:46:50 slot:15/mod:23 kenkenco DIALIN PPP 03-DEC-2000 22:04:22 slot:15/mod:24 cullings DIALIN PPP 03-DEC-2000 21:35:19 HiPer>>
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
=========== -V ========== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Does anyone know of a program that you can use to create a setup file for a chassis that is on an IP address, run it and have the chassis setup for different address? What I want to do, is re-configure a whole chassis Ip pools, NMC Ip, ARC Ip, and all else. Would be nice if I had a program that could view and edit a .CFM, or .NVR and then re-upload the changes. Does anyone have an easy solution for this? TIA Randy robotnic@forcomm.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Quoting Randy Lyle <robotnic@forcomm.net>:
Does anyone know of a program that you can use to create a setup file for a chassis that is on an IP address, run it and have the chassis setup for different address?
What I want to do, is re-configure a whole chassis Ip pools, NMC Ip, ARC
Ip, and all else. Would be nice if I had a program that could view and edit a .CFM, or .NVR and then re-upload the changes.
Well, there is no text file etc to do this. However there is a easy way to do this. So you have a working chassis - say chassis-1 and you want all the configuration of that chassis on a new chassis chassis-2 First on chassis-1 you do this. set bulk-file <filename> save configuration - Now you tftp this file (binary mode) to a location or to the chassis-2 hiperarc use the following commands set bulkfile <filname> reboot This load the chassis-1 configuration to chassis-2, it does include the IP address everything, so in order to get rid of the IP address, I normally configure chassis-1 with a IP network address for the second interface with the IP address that chassis-2 is going to have and only place ethernet connection on chassis-2 for interface 2 This way no configuration changes are necessary -V
Does anyone have an easy solution for this? TIA Randy robotnic@forcomm.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
=========== -V ========== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Brian Burgmeier -
Randy Lyle -
Veda Narayan