I don't remember why, but PAP is all we use with the Netserver+ 8I Steve Coleman wrote:

It turned out to be a CHAP problem. It would authenticate and work for about 3 minutes, then the CHAP timed out and disconnected. I switched to PAP and it's been fine.

Thanks.

----- Original Message ----- From: Ken Kirchner <kenk@shreve.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, September 23, 1999 5:02 PM Subject: Re: (usr-tc) ISDN Problem with Netgear RH348

...

On Wed, 22 Sep 1999, Steve Coleman wrote:

...

Can't seem to get this unit working in any configuration. We have are using the HiperArc and HiperDSP with the latest code on both. The connection will establish and work for a few minutes, but it keeps resetting, usually after 3-5 minutes. This happens if the Netgear calls in using NAT, calls in using a routed subnet, or if the HiperARC calls the Netgear. Idle timers on both ends have been set to 0. Any ideas?

Latest code as in 4.2.32-1 on the ARC? Hmm. I know we are running 2.0.81/4.1.59 and my Netgear RT-328 at the house hasnt had any problems. I use NAT also. Your Netgear is using v1.50 frimware I hope? ___ ___ (___) Kenneth Kirchner .o. mailto:kenk@shreve.net (___) (__) Asst SysAdmin .o. Voice (318) 222-2638 Ext 108 (__) (_) ShreveNet, Inc. .o. Fax (318) 213-6612 (_)

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

-- John Schmerold Katy Computer, LLC 20 Meramec Station Rd Valley Park, MO 63088 314-316-9000 314-316-9200 fax - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.