Re: (usr-tc) R2 and PRI problem
Hi Jorge, If you are talking about E1/PRI do the following, Install the E1/PRI version via TCM, Go to the DSP CLI
chdev span cmd rd (Default) cmd sv (save) re (Reset)
Ask the following questions from your Telco provider Frame type Set ltype = E1 or CRC E1 Switch type Set Swtype = ictr4 (Euro ISDN) or VN4 (France) Line coding is set to HDB3 Make sure your Sigmode is also set to message oriented (Default) Ray W "Jorge Lozano" <jorge@andinet.com> on 04/01/2000 22:40:42 Please respond to usr-tc@lists.xmission.com Sent by: "Jorge Lozano" <jorge@andinet.com> To: usr-tc@xmission.com cc: (Ray Whelan/IE/3Com) Subject: (usr-tc) R2 and PRI problem -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everybody! I have a TCH with Hiper DSP cards, they are working correctly with R2, but I want to make to them work with PRI lines. if somebody know what is the procedure.... can help me? Maybe... the answer is very easy, but I am a newbie in this. Thanks for all. Jorge Lozano M. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com> iQA/AwUBOHJ26ap3oywyFVUlEQIWlwCg0VmR6YcInE/JI6BvVzPJNtip104AnApv wzbbUDD3WUVI33xA5Ue6wYFm =HnLd -----END PGP SIGNATURE-----
When installing a new DSP or doing a firmware upgrade on an existing one, I've always done "Restore T1/E1 and Modems from Default" and "Restore Template 1 from Default", changed the call routing to "Round Robin", and resaved both to NVRAM. I'm thinking that perhaps there may be other things that would be advantageous to change. What sort of parameters do you change when installing or upgrading a DSP? -- --------------------------------------------------------------------- Mark E. Levy, President FSINet, Inc. 800-827-6085 x202 847-753-6832 fax www.fsi.net mark@fsi.net --------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Mark E. Levy -
Ray Whelan